Gooseneck Hitch Recommendation for 2019 GMC 3500 Cab and Chassis  

You do have the installation of the U-bolt safety chains correct for the Buyers Products 2-5/16" Fabricators Flatbed Gooseneck Hitch #3375613500. I have cut out and added below the section of the instructions for the #3375613500 which details…

I had our warehouse measure the B&W Turnoverball Gooseneck Hitch #BWGNRC907 you were looking at, and it measures 12-5/8" tall x 26" wide and 39-1/2" wide if measured from the end of the unlocking handle as shown in the included…

I do have an option for you but there are not any custom fit gooseneck trailer hitches for your 1997 Ford F-350 Cab and Chassis. In order to install a gooseneck trailer hitch you would need to have a fabricator install a set of braces that span the…

34 inch frame hitch fits are for the cab and chassis model trucks. The part #C15312 does not fit cab and chassis model trucks so it would not be a fit for a 34 inch frame. The part #C15800 is an example of a Curt hitch that does fit a 34 inch wide…

The dimensions are below for the B&W Turnoverball Underbed Gooseneck Trailer Hitch #BWGNRK1500. Overall dimensions of the plate- 6” X 8” Bottom of the plate to the bottom of the socket Fin (brace) – 2-1/4" Bottom of the plate to the end of…

Hi Rick, The Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #GY86GR could potentially work but you'll need the correct gooseneck to fifth wheel hitch adapter or you'll want to switch to a gooseneck pin box like #GY98GR. The #GY86GR is designed…

The B&W Companion Flatbed Gooseneck-to-5th-Wheel Trailer Hitch Adapter part #BWRVK3050 has rubber pads on the bottom of the base (one in each corner) which you can see from the attached photo so there won't be direct steel to aluminum contact…

Douglas, it looks like the closest we have to what you're looking for is the Tandem Axle Teardrop Fenders w/ Backing Plates #HP92VR. These fenders measure 72" x 10 3/4" x 20 1/2", have the backing plates you're looking for, and…

For your 2007 Dodge RAM 3500 HD Flat Bed Crew Cab with dually chassis there is not a B&W trailer hitch receiver available. Instead, I recommend you use the Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2" #41936…

I had the Buyers Products 2-5/16" Fabricators Flatbed Gooseneck Hitch #3375613500 measured and have a picture with all measurements included. This is indeed rectangular and is typically installed with the longer sides going across the bed area.…