Adjustable Ball Mount Recommendation that Can be Used with Cruisemaster DO35 Coupler  

To help alleviate the back and forth chucking you are experiencing with your 2 inch receiver there are a couple of things I recommend doing. First is to use a cushioned ball mount, the Convert-A-Ball, which is designed to reduce this type of…

On the Convert-a-Ball cushioned ball mount #AMSV10 from the center of the hitch pin hole to were the nearest part of the drop is approximately 4-1/4 inches. This amount can very slightly depending on the welds. I have edited your picture to show…

To help keep the Adjustable Ball Mount for 2" Hitches #TK5007 snug you'll need an anti-rattle device like the Malone #MPG908 which clamps down or the Let's Go Aero #63232 which uses a block and threaded locking hitch pin.…

There are a few factors that you will need to consider when choosing a trailer hitch for your 1999 Ford F-150 XLT 4x4. First, you will need to know the weight of the trailer or trailers that you intend to pull and the towing capacity of your truck.…

Yes, a trailer that is nose up can cause big problems. A level trailer is ideal and worth working toward for safety. The good news is that you can get the trailer almost exactly level with switching ball mounts. This is where an adjustable ball mount…

Normally the load in the rear of the towing vehicle is not factored in when measuring for the correct ball mount, because the load might not be the same each time you will be towing. If the load in the rear of your vehicle will be the same amount…

Clearance issues with the collar lock style of trailer couplers are not typical. I'd be inclined to believe the issue is related to the ball mount you have now not having the clearance. We have the Convert-a-Ball adjustable ball mount #TK5007…

The Adjustable Ball Mount for 2" Hitches part #TK5007 offers up to a 9" rise and a 10-1/4" drop. In order to confirm this will work for your setup you need to measure from the ground to the top inside edge of the trailer hitch and then…

When you are towing a trailer you want the trailer to be as level as possible behind your F-150. I have attached a helpful article that explains how you can measure to find the best ball mount. You just need a tape measure to do this. Park the truck…

The best option we can provide without knowing the trailer and hitch height would be an adjustable ball mount like the #TK5007 which can be adjusted up to a drop of 10 inches so we know it can give you the ability to tow your trailer level.

The trick here is to get as close as possible. If you are talking about less than 2 inches or so, there is nothing to worry about. Having the trailer tongue a bit too high is preferable to it being too low. You may be a good candidate for an…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…