What Does B and W Companion Hitch for GM Rail Kit Weigh

Question

Question:

what is the weight of this 5th wheel?

asked by: Tom

0

Expert Reply:

The B&W Companion OEM 5th Wheel Hitch # BWRVK3770 that you referenced weighs 255 lbs and has a 20,000 lb trailer towing capacity. It comes apart in a few pieces to allow it to be installed/removed easier. To check out more features on the hitch follow the review video link I attached to this page.

expert reply by: Jameson C

0

Answer 1

Yes, the B&W Companion OEM part #BWRVK3715 is what you need for your 2020 Chevrolet Silverado 2500. This hitch was redesigned to fit the new puck system on the 2020 GM Trucks.

view full answer...

Answer 2

The B&W Companion OEM 5th Wheel Hitch #BWRVK3715 does have 2" of front to back adjustment. You would attach the pivot arms to the base in the desired position fore or aft.

view full answer...

Answer 3

The only time you need a slider fifth wheel hitch is when you are needing to make a tight turn. It's in these situations that normally the nose of the trailer would hit the cab of the truck. A slider hitch then moves the trailer back so that the…

view full answer...

Answer 4

The best manual sliding hitch for your 2019 Chevy Silverado 2500 with factory pucks is the B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package - Dual Jaw - 20K #BWRVK3770. This hitch continues to be a customer favorite…

view full answer...

Answer 5

Start with having the jaw centered over the rear axle of your B and W Companion Hitch for GM rail kits part #BWRVK3710. Unless your trailer has a really wide nose and a non-extended pin box I wouldn't foresee needing the extra 2 inches of…

view full answer...

Answer 6

The best fifth wheel hitch option for a 2021 Chevrolet Silverado 3500 with 8 Foot Bed and OEM Prep Pkg is the B&W Companion OEM 5th Wheel Hitch part #BWRVK3710. It's largely considered to be the best hitch on the market due to the cam action…

view full answer...

Answer 7

Great question! We always recommend going with a slider for a short bed truck just because we don't always know the style of the 5th wheel someone will be towing. Since you'll be towing a newer 5th wheel with your short bed 2022 GMC Sierra…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

What Does B and W Companion Hitch for GM Rail Kit Weigh

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching