Replacement Bearing Kit for a 2018 Grand Design Imagine 2800BH

Question:

I have a 2018 Grand Design 2800bh with 3500# Dexter Axles 120091. Which wheel bearing kit do I need?

asked by: Randall

Helpful Expert Reply:

The correct replacement wheel bearing kit or your 2018 Grand Design Imagine 2800BH should be the Bearing Kit for #84 Spindles part # BK2-100. This bearing kit comes with one L68149 inner bearing, one L44649 outer bearing, the corresponding races, a 10-19 grease seal, a tang washer, and a cotter pin. This will be everything that you need to rebuild the hubs on your Dexter 3,500 lb axle. You will need one kit per hub.

Please note that in order to ensure you have the bearings properly greased before installation on the spindle I highly recommend you use a bearing packer beforehand. For this, I recommend the Bearing Packer part # PTW1218 because it is cost effective and very simple to use. You will also need an install kit like the 7-Piece Installation Set part # PTW83020 and wheel bearing grease like the Prime Guard Wheel Bearing Hi-Temp Red Grease part # L11380. The combination of these parts will provide you with everything you need to change the bearings/seals on you trailer, multiple times.

expert reply by: Conner L