bing tracking image
Q & A Icon

Timbren Axle Less Recommendation for Haulmark Trailer to Gain Lift of 4 inches

Question:

The trailer is a 6*12 single-axle with a Dexter torsion axle with a 15 degree up angle lowering the trailer. I considered getting a dexter torsion with a 30 0r 45 down-angle, but this seems like a better solution. Any suggestions would be appreciated. I have installed 10inch x 2 1/4inch 5-4.5inch bolt circle hub and drums on the dexter axle and would like to transfer them if possible 20 miles since install. I have an E350 van and Im looking to get better ground clearance on the trailer since I moved up from pulling it with a mini-van.

0

Expert Reply:

Based on what you listed wanting the Timbren Axle Less kit part # ASR3500S06 would be exactly what you want. You'll gain a lift of right at 4 inches and your current hub/drums and brake assemblies will easily transfer to it as you have 3,500 lb hubs like what this requires.

expert reply by:
0
Jameson C

Product Page this Question was Asked From


Q & A Icon

Similar Expert Q&A Pages

See More Q&A Expert Answers >>