bing tracking image
Q & A Icon

Parts to Convert Roller Bunks to Bunk Boards on Boat Trailer

Question:

I have a dual axle galvanized ez-loader trailer in good shape but with rollers that are starting to go and need replacing. I am considering changing this over to a bunk type trailer. My boat is a heavy 20 foot hydra-sports deep vee dual console..3500 lbs with motor and gear. I was considering dual bunks on each side mounted horizontally or vertically if necessary. Any suggestions on what I might need to make this possible?

0

Expert Reply:

It sounds like you are just wanting to switch to carpeted bunk boards. For that you can use the CE Smith Carpeted Bunk Boards for Boat Trailers, which come in a number of different lengths: 5 feet long # CE27820, 6 feet long # CE27840 or 7 feet long # CE27845.

To install these you can mount them to brackets that are already on your trailer or use CE Smith Bolster and Swivel Bracket Assemblies; you would need two of these per bunk board. The assemblies are available in different lengths as well: 9 inches # CE10000G-4, 11 inches # CE10001G-4 and 13 inches # CE10002G-4 and can be attached with U-bolts # CE15283GA-4.

I have added links to video reviews of the boards, brackets and U-bolts for you to take a look at as well.

expert reply by:
0
Kyle S

Products Referenced in This Question







Product Page this Question was Asked From


Q & A Icon

Similar Expert Q&A Pages

See More Q&A Expert Answers >>