Can I Upgrade My E2 Roundbar System With Higher Rated Bars  

Typically when changing to a heavier spring bar you will not have to adjust the spring bars. With either the 1,000lb Round Bar #FA94-02-1099 or Trunnion Bar #FA92-02-1099 being installed on either the Round Bar #FA94-00-0800 or Trunnion #FA92-00-0800…

Your Trunnion Fastway e2 Weight Distribution #FA92-00-0600 is capable of using 6,000lb to 12,000lb bars. 6,000lb Replacement Trunnion Spring Bars #FA92-01-0699, 250-600lbs of tongue weight 8,000lb Replacement Trunnion Spring Bars #FA92-01-0899,…

If you were to upgrade to the 800 Lb Replacement Round Spring Bar part #FA94-02-0899 on your Fastway e2 Weight Distribution part #FA94-00-0600 then you would need to readjust the head tilt mechanism. There would likely be a different amount of…

Yes, you can just swap out the bars you have currently with a higher rated 1,000 lb tongue weight set of spring bars to upgrade your system. For that all you need is the part #FA94-02-1099 that you referenced.

Yes the stronger bars are compatible! You can upgrade to the Replacement Round Spring Bar for Fastway e2 Weight Distribution Systems - 1,000 lbs TW #FA94-02-1099 on your Fastway e2 Weight Distribution w/ 2-Point Sway Control - Round - 8,000 lbs GTW,…

Perfect sense! When setting up the Fastway e2 Weight Distribution part #FA94-00-1000 with new weight capacity spring bars like Replacement Round Spring Bar for Fastway e2 Weight Distribution Systems part #FA94-02-1099 that you purchased you want to…

Thank you for your purchases from etrailer, including that for the Fastway e2 Weight Distribution system #FA94-00-0800. You can change out the spring bars to give your setup a higher tongue weight (TW) rating to match your new heavier trailer.…

When choosing the best weight distribution system for your trailer you will want your total tongue weight (TTW) which is composed of the loaded ready to tow weight of the trailer by any cargo stored behind the rear axle of the tow vehicle to fall in…

If the loaded tongue weight is 581 lbs it is within the range of your e2 Weight Distribution System. If you need to upgrade the bars you'd just need the 800 lb spring bars part #FA94-02-0899 and you'd be set.

You should add one spacer washer at a time with the Fastway e2 Weight Distribution System #FA92-00-1000 as there is not a specific formula regarding one washer equaling a certain measurement. The reason for this is that there are too many variables…

The correct Fastway e2 Weight Distribution System for a Forest River Heritage Glen 273RL is part #FA92-00-1200 which is rated for up to 1,200 lbs. If this is not the system you have the heavier spring bars can be purchased using the Replacement…

You can definitely use SumoSprings with a weight distribution hitch like your Fastway e2 #FA92-00-1000 on your 2016 Toyota Tundra. What you want to do is install the SumoSprings and then adjust your weight distribution set up, like you mentioned.…