What Color Are The Brake Controller Wires On a 2018 Ford E-450 Cutaway
Question:
what are the ford wire colors When I ordered you told me that there wasnt a direct connect wire. I did find there was wire by the steering colum
asked by: Tom
Expert Reply:
The trailer brake controller wires on a 2018 Ford E-450 are blue for brake output, yellow/red or gray/red for 12 volt power, violet/white or yellow/green for stop light, and black/gray or black/violet for ground. These wires will all be located inside a 14 pin grey connector located behind the dash. I understand that you said you have a 2019 Ford E-450 which may be why you were told there is not a plug-in harness available however, the schematics for a 2019 Ford E-450 have not yet been released by Ford as of March 2018. With that being said, you most likely have a 2018 Ford E-450 not a 2019 Ford E-450. The reason for this is that the chassis model year is almost always one year older than the actual motorhome. For example, if you have a 2019 Winnebago Outlook on a Ford E-450, the Ford E-450 chassis was most likely made in 2018.
If you will be using a Tekonsha brake controller such as the Tekonsha Prodigy P3 Trailer Brake Controller part # 90195 then the correct plug-in harness for this is the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers part # 3034-P. If you have a different brake controller just let me know what that is and I will see if a plug-in harness is available.
Products Referenced in This Question
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LCD Display
- Up to 360 Degrees
- Tekonsha
more information >
Product Page this Question was Asked From
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Ford
- Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Vehicle Specific
- Tekonsha
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Brake Controller
- Shop: Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Ford
- Shop: Base Plate for Tow Bar
- Shop: Blue Ox Base Plate Kit - Removable Arms
- Article: Flat Towing Package for 2015-2018 Chevrolet Colorado and GMC Canyon
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Shop: Vehicle Tow Bar Brake System
- Shop: Vehicle Tow Bar Wiring
- Shop: Brake Buddy Stealth Supplemental Braking System - Proportional
- Shop: Roadmaster Nighthawk All-Terrain Tow Bar for Blue Ox Base Plate - Non-Binding - LEDs - RV Mount - 8K
- Shop: Roadmaster Battery Disconnect with Switch for Towed Vehicle w/ Flat Tow Brake System - Gas
- Shop: Roadmaster Tail Light Wiring Kit for Towed Vehicles - LED Bulb and Socket - Red
- Q&A: Everything Needed to Flat Tow a 2016 GMC Canyon 4x4
- Video: Roadmaster Tow Bar Wiring Kit Installation - 2017 GMC Canyon
- Video: Brake Buddy Stealth Supplemental Braking System Installation - 2016 GMC Canyon
- Video: Brake Buddy Stealth Supplemental Braking System Review
- Shop: Trailer Hitch
- Search Results: trailer brake controller wiring
- Search Results: trailer registration holder
- Search Results: rv baggage door
- Article: How to Install a Brake Controller on Chevrolet / GMC 1999-2006 Pickups
- Shop: Trailer Wiring
- Video: Curt Trailer Hitch Installation - 2018 Ford F-150
- Video: Review of Pacer Performance Vehicle Light Parts - Third Brake Light Logic Module - PP20-702
- Search Results: tk5906
- Video: Tekonsha Prodigy P3 Trailer Brake Controller Review
- Video: Trailer Brake Controller Installation - 2003 GMC Sierra
- Q&A: Red, Black, and White Wire Functions on Old Trailer Light
- Q&A: Making 7-Way to Camper Shell Third Brake Light Adapter
- Article: Brake Controller Installation on a Ford Full-Size Van
Ray D.
4/28/2020
I have a 2017 Aspect winnebago with a ford E-450 super duty v-10 gas engine I need to know the color code of the four wires that are under the dashboard above the break pedal that aren’t connected to any thing I don’t have a special harness for this so i need to know which wires go to connect to. Thanks for any help you can give me.