Replacement Solera Power Awning Idler Head in White  

When your current pitch arm is folded out and fully extended measure it's overall length. If it's 69 inch it would be the part #LC375994 for a replacement or if it's 63 inches #LC97UD.

Thank you for the picture, I can see the pin is bent rendering your solera head shaft inoperable even though you tried bending it back. Unfortunately, the only fix would be to completely replace the head as this part isn't currently…

The screw size for the attachment screw on a Solera Power Awning Idler Head #LC672052, is a 5/16"-18 x 2-1/4" Phillips head screw. You can pick this up at your local hardware store.

Yes, you can just purchase the black idler head. We have two options. Solera Power Awning Idler Head - Black item #LC672052 or Solera Power Awning Speaker Idler Head, Black item #LC342150

From the information I could find it looks like the awning you have on your 2017 Grand Design came from Dometic. If this is the case then we unfortunately don't have any replacement head cover parts. If you are wanting to replace your awning with…

To remove the old pin you'll need to remove the cover, remove the two retaining pins, and then slide the old pin out. To install the #LC93FR you'd just reverse the process.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

In regards to a Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter like part #RP94720 and a Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Adapter Pin Box like part #325-GH-8045, the main difference is that one uses air for…

Only certain bike racks are rated for use at the back of an RV or trailer but the Hollywood Racks #HR1400Z bike rack is not one of them. Generally, any rack that can fold or tilt, with few exceptions, won't be rated for this applications. The…

We noticed when we installed the etrailer Trailer Hitch Receiver #e98856 on a similar 2022 Jeep Wrangler it had 8" from the center of the hitch pin to the rear edge of the stock spare tire. This would likely not allow you to fold up the…

The Hollywood Racks RV Rider #HLY64FR has a frame clamp design that was intended for use with step through style bike frame like what your Aventon Adventure bikes have so this rack would work perfect for you. I attached a picture that shows this…