Can Brophy D-Ring Tie Down Anchor Install Through Two Boards Next to Each Other
Question:
My trailer has 5/4x6 deck boards - would it be okay to split the hole in between them so the d ring and backing plate mounts with two bolts in each board? It seems stronger than drilling a 3.5” hole in the middle of a 5/4 board to me but I just wanted an expert opinion before I start drilling. Thanks!!
asked by: Kyle
0
Expert Reply:
You could install the Brophy D-Ring Tie Down Anchor # RR5K the way you described if you like. You could put two bolts through two boards right next to each other if you like.
expert reply by: Jameson C
0
Product Page this Question was Asked From
Brophy D-Ring Tie Down Anchor w Backing Plate - Bolt-On - 1/2" Wide - Recessed - 1,600 lbs
- Tie Down Anchors
- Trailer Tie-Down Anchors
- Truck Tie-Down Anchors
- Tie-Down Cleats and Rings
- 1600 lbs
- D-Ring
- Surface Mount - Bolt-On
- Brophy
more information >
Featured Help Information
Miscellaneous Media
Similar Expert Q&A Pages
- How Long are Bolts for Recessed Trailer D-Ring part # RR5K
- How To Install The Brophy Trailer D-Ring Tie Down, # RR5K, On A Wood Trailer Floor
- Could Brophy D-Ring Tie Down Anchor w Backing Plate # RR5K Work Mounted to Plywood
- Hole Diameter Recommendation for Installing Brophy D-Ring Tie Down Anchor # RR5K
- What Is Included With Brophy Recessed Trailer D-Ring Tie Down with Backing Plate and Hardware RR5K
- Brophy D-Ring Compatibility with 1/2 Inch Plywood Decking
- Tie Down Anchors Made In USA
- Will Backing Plate of Brophy D-Ring Tie Down Anchor # RR5K Prevent Anchor From Ripping Out
- Tow Dolly Ratcheting Strap to Replace Cables That Secure Vehicle
- What Grade Bolts Come with Recessed Trailer D-Ring Tie Down, # RR5K
- Installation of Brophy Recessed Trailer D-Ring Tie Down # RR5K on Toy Hauler Wood Floor
- Installation Methods for Brophy Recessed Trailer D-Ring Tie Down with Backing Plate # RR5K
- Tie-Downs to Secure UTV to Aluminum Trailer
- Recommended Tie-Downs for an Open Car Trailer with Diamond Plate Flooring
- Can the Recessed Trailer D-Ring Tie Down with Backing Plate be Used on an Aluminum Trailer Floor
- Dimensions of the Ring and the Bolts in Recessed Trailer D-Ring Tie Down with Backing Plate # RR5K
- Recessed Trailer D-Ring Tie Down RR5K Measurements
- Is 3/4 Inch Plywood Floor Adequate for D-Ring Tie Down Anchors with Backing Plate for 3,000 lb Car
- Does the Tie-Down Ring or Backing Plate have to Face a Certain Way in Tie-Down with Plate # RR5K
- D-Ring Recommendation for 48 Foot Cargo Trailer
- Can the Brophy Recessed Trailer D-Ring # RR5K Be Installed Safely on a Featherlight Open Car Hauler
- Size of Hole Saw to Use to Install the Recessed Trailer D-Ring Tie Down RR5K
- Can Recessed Trailer D-Ring Tie Down with Backing Plate be Installed in a 2007 Sportster Tow Hauler
- Recommended D-Ring Tie Downs and Straps to Secure 1998 Jeep TJ to Trailer
- Will the Brophy Recessed D-Ring Tie-Down Work on an Enclosed Trailer with Particle Board Floor
- Is the Backing Plate and Mounting Hardware for D-Ring Tie Down # RR5K Available Separately
- Tie Down Anchor Recommendation for Trailer That Has 3/4 inch Depth Restriction
- Does the Orientation of the Backing Plate Matter on the Brophy Tie Down Part # RR5K