Question:
What is the correct motor and fan replacement for a Model PR-8 100 cfm, 120 v, 60 Hz, 1.8 amp 1.5 amp mtr
asked by: Angela R
Expert Reply:
I checked with my contact at Ventline and for your PR-8 100-CFM range hood the correct replacement motor is the part # BVD0278-00. Then for the fan blade you will need part # BCD0409-00.
Replacement Fan Blade for Ventline RV Range Hood - 6-7/8" Diameter
Replacement Fan Motor for Ventline Range Hoods
Follow up Questions
I installed the motor and fan into the hood, but it blows not suck. Since the is only a high speed and low speed wire and the motor spins CCW, I will need another fan blade. Do you have any info on a fan blade? 124978
@WilliamN I contacted the manufacturer and they suggest that the fan blades are backwards on the motor shaft. Switch that around and let me know how it works. 82055
I am looking for the whole silver box for model number PR-8 100-CFM 76113
I'm not sure if it's what you're looking for, but the closest option to this that we have available is the Wiring Cover # CA0461-02 , which will fit your PR-8 Range Hood model. We don't have the whole outer frame/box available by itself. 62177
I was in search of the same part and I think it is called the Blower housing. In a document you have on the PR-8 regarding replacement filters there is a diagram with Blower housing labeled but there is not a part # listed. It says you must contact the factory. Am I reading that correctly? Is it possible to get the blower housing? Is there a recommended vent hood that replaces the Ventline PR-8 if the blower housing is not available? 73067
@KimS If the document mentions reaching out to Ventline for a replacement blower then I'd try going that route. The are pretty good about having replacement parts for their vents. 73141