Trailer bearings and Seals For Lippert 3500 Lb Axle on Jayco Jay Flight

Expert Reply:

Since the axle in the photo is a Lippert 3,500 lb axle the bearings you need are part # L68149 for the inner and part # L44649 for the outer. You need part # RG06-050 for the seals. You can remove your existing hub to check the bearing numbers stamped on the side of the bearing to double check but these are the most common bearings and seals used on that axle. You can also use the kit part # BK2-100 that comes with the cotter pin and tang washer.

If you are looking for your bearing numbers to replace the hub, the etrailer.com 5 on 4 1/2 hub part # AKHD-545-35-EZ-K works well for you as long as the axle is an EZ lube axle. If you have standard axle, I recommend hub part # AKHD-545-35-K. These hubs come with the bearings,seals and races that you need.

click to enlarge

expert reply by: Heather A

0