What Does etrailer.com Hitch for 2017 Jeep Grand Cherokee Look Like Installed

Question

Question:

I am curious as to how much of the hitch frame would be visible under my Jeep. Draw Tite has one that is very hidden but not quite enough towing weight for what I need. Thank you.

asked by: Brian

1

Helpful Expert Reply:

I attached a picture that shows how much of the etrailer.com hitch part # E98901 would hang below the rear bumper when installed.

expert reply by: Jameson C

1

click to enlarge

Answer 1

Yes, the etrailer Trailer Hitch Receiver #e98901 does in fact fit your 2021 Jeep Grand Cherokee Limited. I have included a photo of this hitch installed on a 2021 Jeep Grand Cherokee Limited for you to check out. If you plan to do any towing you can…

view full answer...

Answer 2

Yes, the etrailer.com Trailer Hitch Receiver - Custom Fit - Matte Black Finish part #e98901 is a fit for the diesel models of 2015 Grand Cherokee. I have attached an installation video of the Curt hitch on a 2015 Jeep Grand Cherokee, the installation…

view full answer...

Answer 3

There is a pretty simple fix for the issue people have where it seems like the harness is too short. What you will need to do is cut the zip-tie that holds the left and right harnesses together and then pull the wires apart as they are bonded…

view full answer...

Answer 4

Since you do not have the removable panel for the rear hitch opening of your 2018 Jeep Grand Cherokee the hitch you'd want is the etrailer part #e98901. This hangs below the rear bumper completely and will give you a higher capacity 2 inch…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

I can confirm for you that yes, your 2020 Jeep Grand Cherokee Limited is compatible with the etrailer Trailer Hitch Receiver #e98901. The accompanying photo shows this hitch installed on a '20 Grand Cherokee so you can see how it will look on…

view full answer...

Answer 7

The best hitch for your 2014 Jeep Grand Cherokee Limited is going to be the Curt Trailer Hitch item #C13065. This hitch is custom fit and bolts to your Jeep with included hardware. I really like this hitch because the crosstube mounts behind your…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The most hidden trailer hitch available for your 2020 Dodge Durango is without a doubt the Draw-Tite Max-Frame Trailer Hitch Receiver #DT38MR. The 2" receiver for this Class III hitch will actually extend out through the bottom of the rear…

view full answer...

Answer 10

I forwarded this to our contact at Demco and what they responded with is below. The short answer is you should already have all of the parts you need: The baseplate for the 2018 Chevy Equinox ( #DM9519332) is the Demco tabless baseplate. The 2015…

view full answer...

Answer 11

Hey Brent, If your 2020 Jeep Grand Cherokee has the factory tow package then you'll be able to plug in the Pollak 5th Wheel / Gooseneck T-Connector #PK11893-33-32. It may be necessary to see a local Jeep dealer to activate the tow package wiring…

view full answer...

Answer 12

I have a great solution for you to mount a hitch behind the bumper on your 2020 Dodge Durango; have a look at the Draw-Tite Class III Max Frame #DT38MR. This hitch mounts behind the bumper and is accessible via the removable panel on the rear bumper…

view full answer...

What Does etrailer.com Hitch for 2017 Jeep Grand Cherokee Look Like Installed

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching