Removing Cap of 2017 Honda Ridgeline to Install Trailer Wiring  

For your 2023 Honda Ridgeline I recommend the Redarc Tow-Pro Liberty Brake Controller #RED24FR. The main unit of this brake controller will install behind the dash so only the control knob will be visible in the vehicle. This gives it a nice clean…

It can indeed be difficult to locate the correct pigtail that is needed for the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part #118778 on your 2017 Honda Ridgeline but I assure you this is present. That said, others have had…

The connector pictured is not the correct one for the black module of the Tekonsha T-One Wiring Harness #118778 to install into. The correct one will be located behind the access door in the driver side of the rear cargo area in your 2019 Honda…

We have a wiring harness for a 2023 Honda Ridgeline depending on what kind of wiring your trailer has. Both harness plug into your factory wiring behind your rear bumper. These harnesses also include the necessary fuses to activate the towing…

Since your 2017 Honda Ridgeline has the factory 7-way connector on it you should have a wiring harness that has the standard to package plug. It's the harness that plugs into the back of the 7-way connector and looks like the picture I attached.…

The installation of the T-One Vehicle Wiring Harness with 4-Flat Trailer Connector #118778 on your 2019 Honda Ridgeline is a bit different because it uses a black box module, but it is still a straightforward install. What you will need to do is…

The only difference from the Bumper Mounted Tire Carrier, part #TR-1, and part #TR-2, is that part #TR-2 folds down to provide access to storage areas when mounted to your RV. If you think the folding feature would come in handy, I would recommend…

Depending on the lighting for the Bronco your brake light relay wire might not be useable. Models without the signature LED lighting will have a purple wire for the brake light, while models with the signature LED lighting will not have an accessible…

The #HBA-CAM adapter will not interfere with the actuator working on your 2006 Dodge Ram that does not require the adapter. It basically just puts enough load on the output circuit so that the controller thinks a trailer is connected. That additional…

The Adapter Module for BrakeRite Electric Over Hydraulic Actuator #DX35FR was designed for use on the trailer side of the wiring. If you had this installed on the truck wiring the integrated controller would think a trailer is connected all the…

It sounds like you were needing the Adapter #DX35FR but accidentally ordered the adapter with the plug, part #T4845900, is that correct? If so, no worries. You can indeed cut the plug off the adapter and hardwire it as shown in the diagram I…

Do you know who manufactured your existing bed rails? The Curt E5 16K Fifth Wheel Hitch you referenced, part #C16115 are compatible with universal rails manufactured by Reese, Curt and Valley. A universal rail will have three mounting slots on each…