Baggage Door Latch for Door on Travel Trailer  

Yes, the Global Link RV Baggage Door Slam Latch #295-000078 that you referenced will easily replace the TriMark 060-0460 EZ Access Baggage Door Lock that you also referenced. These are both the same industry standard style of compartment lock.

Most factory baggage doors have Lippert handles and they are generic keyed. If you want unique keys to better secure your cargo I recommend swapping them with the Global Link RV Baggage Door Slam Latch with Keyed Alike Option - Black -…

The RV door latch we offer that fits the biggest cut out is the Bauer part #BA64FR which fits a cutout of 5-1/4 inch by 4-1/2 inch.

I can provide a drawing for the Global Link RV Baggage Door Slam Latch, #295-000078. Please please see the attached image.

The Global Link RV Baggage Door Slam Latch with Keyed Alike Option, #295-000078, all use the Key for Global Link RV Standard Baggage Door Locks - 391 - Qty 1, #295-000079. To add additional keys, simply order part #295-000079. If your mounting…

Manufacturers do not list the part numbers they use so we have no way of looking up the specific match but we can measure the cutout hole to determine the correct replacement. To do this you'll just need to remove the backing plate from the slam…

The Global Link RV Baggage Door Slam Latch with Keyed Alike Option #295-000078 that you referenced is made from steel without plastic components. The steel is much sturdier and would be harder to break into. That would be the biggest advantage over…

The internal hardware of the Global Link RV Baggage Door Slam Latch #295-000015 is approximately 1-1/2" in length so your door would need to match that size to allow the outer latch pieces to sit flush against the door. That being said you can…

The Global Link Locking Slam Latch #295-000078 is designed for doors 1-3/4" thick and the #295-000015 is designed for 1-1/2" thick, so you would need to know how thick your pass thru doors are in order to choose the correct one. With that…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…