Question:
I recently purchased a used motorhome that had previously had an automatic electric step but had been bent so the previous owner took out the motor and all other components and just used the step manually after cutting off all the wires from the coach. I have since purchased a 28 single step Kwikee and all that came with it was a plug with 2 wires. I would think that it would still work but not in conjunction with the door opening. I think I need a controller as there is a lot more than 2 wires from the coach. Could you confirm that I require a controller and if so what model I would require. I appreciate any help you can give me and look forward to a speedy response.
asked by: Ed L
Expert Reply:
For your Lippert Series 26 step, I recommend the Lippert Components Kwikee Step power switch and door kit # LC369311 and then using controller # LC379146. Then you will also add the Lippert Components Kwikee Step Replacement Light # LC379414. This will work the single step # LC3747451 which comes with gears and motor only.
If you are unsure of the current gear box and motor, then you would use the complete kit # LC379769.
Replacement Rocker Switch with Door Sensor for Kwikee Electric RV Steps - 250V
Replacement Step, Motor, and Switch for Kwikee RV Electric Steps - 28 Series - 23-5/8" Wide
Replacement Control Unit for Kwikee Electric RV Steps
Replacement Light Kit for Kwikee Electric RV Steps - Amber - 2-13/16" Diameter
Motor Upgrade Kit for Kwikee 28, 31, 37, and 39 Series Electric RV Steps
Replacement Control Unit for Kwikee 38 Series Electric RV Steps
