Replacement Wobble Roller Needed with 1 Shaft for Older Boat Trailer
Question:
trying to find wobbler roller to match my easy load boat trailer. wobbler measures 4 3/8 od x 2 3/4 wide x 1inch shaft od. but I cant seem to find that measurement. 1 in shafts seem to be 5 inch od, which is not a match. I used calipers to measure. any help finding right wobbler. I dont have manual to look up. boat is 92 Larson xl180
asked by: Doug
0
Expert Reply:
The only wobble roller that we have which fits a 1" shaft and doesn't have a 5" diameter is the CE Smith # CE29539. This wobble roller has a 4-1/4" diameter and measures 3" wide. If you need it to have a larger diameter than 4-1/4" then you need to bump up to the 5" diameter like the Yates Ribbed Wobble Roller for EZ Loader Boat Trailers # YR500YW-8PEZ. If you still have the original rollers on your boat trailer and the trailer is as old as your boat then it is entirely possible that the roller has worn down some over the past almost 30 years which is why the diameter seems to be such a difference.
Attached are some review videos that you can check out as well.
expert reply by: Jon G
0
Products Referenced in This Question
Yates Ribbed Wobble Roller for EZ Loader Boat Trailers - TPR - 1" Shaft
- Boat Trailer Parts
- Roller and Bunk Parts
- Rollers
- 5 Inch Diameter
- Wobble Roller
- Thermoplastic - Non-Marking
- Fits 1 Inch Shaft
- Yates Rubber
more information >
Video/Article/FAQ this Question was Asked From
Article or Video
