Does the 3.5K Dexter Nev-R-Adjust Electric Trailer Brake Kit Come with Bearings
Question:
Can you tell me if this assembly is complete with bearings? Thank you
asked by: Robert S
Expert Reply:
The Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-468-469 comes only with the brake assemblies. For the correct bearing kit that fits hub and drum assemblies like part # AKHD-545-35-EZ-K or # 84656UC3-EZ which are used with these brakes you need Kit # BK2-100. This comes with an # L44649 bearing and matching race, an # L68149 bearing and matching race, plus a 10-19 seal with an ID of 1.719" and an OD of 2.565" as well as a cotter pin and tang washer.
I have attached installation videos for both the electric brake kit and the bearing kit that you can reference.
Products Referenced in This Question
Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Difference Between Dexter and etrailer Hub/Drum Assembly for 3,500 lb Axles
- Q&A: Comparing the eTrailer and Dexter Electric Trailer Brake Kits
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: How to Initially Adjust the Dexter Nev-R-Adjust Electric Trailer Brakes
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Q&A: Correct Replacement for Tru-Ryde Hub/Drum RVD-H-545
- Q&A: Replacement Hubs And Electric Drum Brakes For A 2011 Airstream Flying Cloud 27FB
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?