Lift Kit Recommendation for Dexter Torflex #9 Axle on Silver Shadow Camper  

The bolt hole spacing on the Torflex Lift Kit #K71-725-02 is 9 inches on center, and 9-1/2' on center. I have attached a photo with these dimensions, as well as a review video for you to check out.

You'd have to measure the height of the brackets that your current axles are attached. The Torflex Lift Kit #K71-725-02 can't attach to brackets that are taller than 3 inches.

Thank you for the photo of the axle sticker; that's always helpful in helping us identify what you've got. That serial number is for a Torflex #10 axle, so the correct lift kit is the #K71-707-01 for a single axle or the #K71-707-02 if…

I have found a solution for you. The Dexter Torflex Lift Kit for Tandem Axle, #K71-725-02, will give you 3-1/8 inches of lift. This lift kit raises the frame of the trailer and is compatible with side-mounted 5,500 -7,000 lbs #12 Torflex axles.

Yes, the Torflex Lift Kit #K71-725-02 is the correct one to use on your 5th wheel trailer with tandem #12 Dexter 7K Torflex axles. This kit will provide an additional 3-1/8 inches of rise and will help level out your trailer so it isn't nose…

You simply need a different kit. The Torflex Lift Kit - Tandem Axle - 3-1/8" Lift #K71-725-02. This kit has the 9 inch on center holes for your axle. I've attached a photo of the lift to assist.

Because you would be increasing the distance from the frame to the axle when using Torflex Lift Kit - Tandem Axle - 2-7/8 inch Lift Item #K71-724-02 it would affect the fit of the shocks on your trailer. You will either have to relocate where the…

The Torflex Lift Kit part #K71-723-01 is correct for a Forest River Rockwood A122 with a Dexter Torflex #9 Axle.

I sent your axle info to Dexter and they were able to determine that you have a set of 7k Dexter Torflex axles so the correct lift you need is the part #K71-725-02 which will give you a lift of 3-1/8 inches.

I'll start by saying that without knowing which hubs are on those axles, it's tough to know exactly which lug studs are on them, but I was able to research and determine that the studs are normally 1.8" long. Taking this into…

The Dexter Trailer Hub and Drum Assembly for 5,200-lb Axles with a 6 on 5-1/2 item #8-201-5 is the replacement for your Dexter HD 1206 hub. In order to match up the wheel studs for your Dexter HD 1206 hub, you will need to find the full dimensions of…

Given the capacity, you have a Dexter Axle #10 Torflex torsion axle. The correct lift kit is part #K71-724-02, which will work with your existing tandem axle setup, as long as the mounting brackets aren't the 3 inch tall brackets.