Trailer Hitch for 2019 Honda HR-V With Front-Wheel Drive
Question:
Do you have a Draw-Tite hitch for a 2019 Honda HR-V front wheel drive? The Draw -Tite hitch that is listed for my vehicle says all wheel drive.
asked by: James L
Expert Reply:
There is a trailer hitch that will fit your 2019 Honda HR-V, but not from Draw-Tite; the hitch that will work for your front-wheel drive '19 HR-V is from Curt:
- Curt Trailer Hitch # C11416
If you plan on doing some light towing you will need T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118673 to power your trailer's lights. The correct ball mount for this hitch is the Curt Class II # C45521; you'll also need Pin and Clip # F-4 to secure it to your hitch and 1-7/8" Hitch Ball # A-80 or 2" Hitch Ball # A-82.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
2" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Stainless Steel - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Stainless Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- CURT
more information >
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- CURT
more information >
Curt Hitch Pin and Clip for 1-1/4" Hitches - 1/2" Diameter x 2" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- 2-1/2 Inch Long
- Fits 1-1/4 Inch Hitch
- 1/2 Inch Diameter
- 2-1/2 Inch Span
- CURT
more information >
Product Page this Question was Asked From
1-7/8" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Stainless Steel - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Stainless Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Recommended Trailer Hitch, Wiring Harness and Ball Mount for 2004 Volvo XC70
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Article: The Best Trailer Tongue Locks for Preventing Trailer Theft
- Q&A: Does Trim of 2019 Honda Passport Get Modified to Install Curt Trailer Hitch
- Q&A: Does Curt Hitch for 2019 Honda Passport Install Below the Bumper
- Q&A: Does the Bumper Cover Have To Come Off To Install Curt Hitch On a 2019 Honda Passport
- Q&A: Ball Mount with 5 Inch Rise and Compatible 2 Inch Ball for a 2015 Honda CR-V
- Q&A: Recommend Ball mount with High Rise for a 2013 Chevrolet Sonic Hatchback
- Q&A: Trailer Hitch Receiver Fit on 2020 Hyundai Venue
- Article: How to Measure for Trailer Hitch Drop