Is There A Cover For The 6-Pole Square Trailer Connectors

Question:

Hello, Do you have or make a cover for the #47995 6 wire square connector set? I would like to cover the female end of my connector on my motorcycle when I am not pulling my trailer. This way the cover will keep the rain and dirt out of my connector. Thank you in advance for your reply.

asked by: Garry S

Expert Reply:

I do have an option for you but there is not a trailer plug cover available for the 6-Pole Square Trailer Wiring Connector Kit part # 37995. If this is what you will be using then you can just glob part # 11755 on the pins as that would then do a pretty good job of keeping them protected or you can buy two sets and use the opposite as a cover once you cut the wires.

If you want something with an actual cover you will need to use 7-way trailer connectors which are much more common than the 6-pole square trailer connectors listed about. The extra pin can just be left empty. I have attached the parts you will need below:

Vehicle End part # PK12-707E
Trailer End part # PK12706
Trailer End Cover part # FA82-00-3315

expert reply by: Conner L