bing tracking image
Q & A Icon

Troubleshooting Loss of Clearance Light Function on Bendron Titan Enclosed Trailer


2012 Bendron Titan Trailer I Have no side or top clearance lights. Brake lights turn signals and license plate lamp work but no top or side clearance lights


Expert Reply:

On a enclosed trailer like your Bendron Titan the amber clearance lights will typically be wired to the running light circuit, the same one that provides power to your license plate lamp. Sine that circuit functions the issue is probably that there is one main wired connection up to all of those clearance lights that has failed. Since it is very unlikely that all the bulbs failed at once the wiring is the most likely issue.

We do not have access to wiring schematics for this trailer but at the interior you may be able to find where the main wiring enters the trailer and check this for a wire that may be damaged, pinched or that has simply come loose. Since all lights failed at once you may well only have to locate and correct one single fault.

If you have a tester like # PTW2992 or # PTW2993 you can test the wiring for the running light circuit to find the point where power is lost. You can also test at the individual lights themselves if you wish. If you provide your trailer VIN to Bendron they may be able to give you some guidance on the location of the wiring and how best to access it for their trailer.

expert reply by:

Products Referenced in This Question

Product Page this Question was Asked From

Q & A Icon

Similar Expert Q&A Pages

See More Q&A Expert Answers >>