Could Trailer Hub and Drum Assembly # AKHD-655-6-EZ-K Replace Hub with Bearing LM64048
Question:
replacement drum kit AKHD-655-6-EZ-K HAS 15123 outerbearing is this the same bearing as klm67048
asked by: Ted
1
Helpful Expert Reply:
Sounds like you have a hub setup currently that is using the # LM67048 as an outer bearing and you want to know if the hub part # AKHD-655-6-EZ-K is going to fit your spindle although it has a different outer bearing number of # 15123. The answer is yes, the hub will fit as both bearings have the same inner diameter (1.25 inch) which is all that really matters in this regard.
helpful expert reply by: Jameson C
1
Products Referenced in This Question
Replacement Trailer Hub Bearing - 15123
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing 15123
- Race 15245
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - LM67048
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing LM67048
- Race LM67010
- 5000 lbs Axle
- 6000 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- 25580
- 15123
- For 5200 lbs Axles
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Similar Expert Q&A Pages
- Which Hubs/Drum Assembly and Brakes for Timbren Axle-Less Suspension 3500-lbs with 4 Lift
- Recommended Hubs/Drums and Brakes for Timbren 5,200 Lb Axle-Less Trailer Suspension System
- How Many Hub and Drum Assemblies Are Included In The Trailer Hub and Drum Assembly AKHD-655-6-EZ-K?
- Replacement Hub for #42 Spindle on Homemade Trailer
- Do I Need To Use A Weight Distribution System When Towing My Trailer?
- Installing Castle Nut in Hub and Drum Assembly
- Hub and Drum Compatibility For Timbren Axle-less Suspension 5200-lbs
- Can a Hub with Outer Bearing 15123 and LM67048 Both Fit Same Spindle
- Replacement Brake Assemblies and Hubs for Trailer with Lippert 6k Axles
- Replacement Hub and Drum Assembly for 12 x 2 Inch Brakes
- Replacement 10 Inch Brake Drum/Hub for 4400 Lb Trailer Axle
- Can Trailer Wheel Fit on Hub if the Center Hole is Larger Than Hub Bore
- Recommendation For Hub Upgrade For Mobile Home Axle
- Hub Recommendation for EZ Load Boat Trailer with Number 42 Spindle
- Does Lippert 5,200 lb Axle and Dexter 5,200 lb Axle Use Same Bearings and Hubs
- Dexter Axle Hub Conversion for 14.5 Inch or 15 Inch Wheels on Equipment Trailer
- What Bolt Pattern Holds Hub/Drums # AKHD-655-6-EZ-K to Axle
- Does AKHD-655-6-EZ-K Pre-Lubed 3500 lb Hub Drum Need Additional Grease Before Installation
- Determining Axle Capacity on 1978 Enclosed Gooseneck Trailer
- Who Makes the Bearings for AxleTek/etrailer Trailer Hub and Drum Assemblies
- Hubs and Electric Brake Assemblies for M1010A2 Military Trailer
- Replacement Hub and Drum Assemblies with Inner Bearing 25580 and Outer Bearing 15123
- Replacement Hub/Drum and Braking Assemblies for 6K Dexter Axle Torflex EZ Lube Axles
- Locating Replacement Hubs and Brake Assemblies for 2014 Keystone Cougar Trailer
- Converting from 5 on 4-1/2 Inch Trailer Hubs to 6 on 5-1/2 Inch Hubs
- Replacement for Lippert 5200-lb Axle on 2006 Holiday Rambler 5th Wheel
- Replacement Hubs Compatible with Dexter Mobile Home Axle
- Replacement Hub/Drums and Brake Assemblies for Trailer with 5,200 lb Axle
- Want To Convert Hub And Drum Assembly From 5 On 4-1/2 Inch Bolt Pattern To 6 On 5-1/2 Bolt Pattern