Is HydraStar Marine EOH Actuator Kit Compatible With 2017 Nissan Titan XD Factory Brake Controller

Question

Question:

I have a 2017 Nissan Titan XD Cummins with the factory brake controller. Is this system compatible or do I need to purchase the actuator adapter module?

asked by: Brian

0

Expert Reply:

I reached out to HydraStar, who told me the HydraStar Marine Electric Over Hydraulic Actuator w/ Breakaway and 7-Way RV Harness - 1,600 psi # HS381-9067 will work with the factory brake controller on your 2017 Nissan Titan XD and that you do NOT have to use the HydraStar Electric Over Hydraulic Actuator Adapter Module # HBA-CAM.

I have added a link to a video review of this actuator as well as an install for you to check out.

expert reply by: Kyle S

0

Jesse S.

2/26/2020

We’re you able to confirm that the stock Titan XD tbcu works with the Carlisle/hydra star EOH brake controller?Thank you

Reply

Chris R.

2/27/2020

Yes, the HydraStar EoH Actuator # HS381-9067 is directly compatible with the OEM brake controller on your Nissan Titan XD (which is actually the Tekonsha Prodigy P2 # 90885). A separate adapter isn't needed for proper operation, either.

Reply

Answer 1

Hey Tim, it sounds like your Grand Design may have electric over hydraulic brakes but I am not totally sure. If that's true make sure your brake controller is put in hydraulic mode. Otherwise an aftermarket brake controller that was designed to…

view full answer...

Answer 2

The channel of the Demco 21K #DM16080-52 coupler is 3 inches deep. The distance from the center of where the trailer ball would sit to the first 5/8 inch hole is 7 inches, and 12 inches to the second hole. The Titan #T4853100 dimensions are a little…

view full answer...

Answer 3

Thanks for the photo, and the distance between the front and rear bolt holes is 5 inches for the Demco Channel Tongue Trailer Coupler - Silver - 2-5/16" Ball - 3" Channel - Bolt On - 21K #DM16080-52. So if you measure the bolt holes on your…

view full answer...

Answer 4

Hello Darren. Thanks for reaching out, I can definitely help with this. To convert your 2024 Brinkley Z2900 5th wheel over to disc brakes, you will need a disc brake kit, a brake line kit, and electric over hydraulic actuator, and a breakaway kit for…

view full answer...

Answer 5

You can convert surge brakes to an electric over hydraulic braking system. To do this, you will need an electric over hydraulic actuator and a brake controller. For an electric over hydraulic actuator, I recommend looking at the Carlisle HydraStar…

view full answer...

Answer 6

Hi Tom, I've attached the wiring diagram for the Hydrastar Electric Over Hydraulic Actuator Kit for Disc Brakes #HBA16-252-82 below as well as a video I made where I'll walk you through the installation process.

view full answer...

Answer 7

First you will need to remove the old hydraulic equipment. Remove the surge coupler or actuator, remove all the lines, and finally remove the brake assemblies. If you have 10 inch diameter hub and drums, you may need to replace those as well. If you…

view full answer...

Answer 8

Hey Alex, So it sounds like you just want to replace your Ausco electric over hydraulic actuator with one that is compatible with your Chevy's brake controller, and you can definitely do that no problem. Since you have a boat trailer I'm…

view full answer...

Answer 9

Traditionally, trailer manufacturers did not use electric brakes on boat trailers because the brake magnet wiring and trailer wiring did not always have the best insulation or water protection. These days, more and more manufacturers are using…

view full answer...

Answer 10

There really isn't a particular maximum trailer weight that is used to determine when brakes need to be added to both axles of a tandem axle setup. While I do still recommend checking your local laws, I am also not aware of any general laws that…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

The Hydrastar Vented Marine Electric Over Hydraulic Actuator for Disc Brakes #HS481-8067 is designed to be completely plug-and-play so the female end of the 7-way would need to connect to the 7-way cable that's already installed on the trailer…

view full answer...

Is HydraStar Marine EOH Actuator Kit Compatible With 2017 Nissan Titan XD Factory Brake Controller

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching