Will the Chrome Trailer Wheel Center Cap # 319EZ Fit a Wheel With a Center Hole of 3-1/8 Inches
Question:
Checking on 319EZ cap the center hole is 3 1/8inch and want to make sure this cap will fit. Thanks for answering this e-mail
asked by: John P
0
Expert Reply:
The Chrome Trailer Wheel Center Cap, part # 319EZ, is designed to fit wheels that will have a pilot hole diameter of 3.19 inches. The 3.19 measurement is about 3-3/16 inches. The pilot hole on your wheel would probably measure closer to the 3-3/16 measurement if you measured again using 1/16th inch increments. This would be the correct center cap for your wheel.
The next closest center cap would measure 3.33 inches, which is equal to 3-5/16 inches. This cap would be too big for your wheel.
expert reply by:
Jeff D
0
Product Page this Question was Asked From
Trailer Wheel Center Cap, Chrome, 3.19" Pilot Size
- Wheel Covers Hubcaps
- Center Wheel Caps
- Front and Rear Wheels
- 3.19 Pilot Diameter
- Steel
- Excalibur
more information >
Continue Researching
- Article: Trailer Tire Sizing
- Q&A: Is There A Picture Of This KE33JR So I Can See Exactly What It Looks Like
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between Load Range C and D ST175/80D13 Trailer Tires
- Q&A: Replacement Shroud for Coleman 7330-713 RV Rooftop Air Conditioner
- Q&A: Can Bearing Buddy Fit Lippert 7k EZ Lube Style Axle
- Q&A: Center Cap Recommendation for Aluminum Hi-Spec Series S5 Trailer Wheel AM22323HWTB
- Article: Measuring a Trailer Tire
- Q&A: Replacement Hub and Drum Assembly for Lippert 4.4K 136214 Hub and Drum
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Install E-Track in 3 Easy Steps