Parts Needed to Flat Tow 2019 Jeep Wrangler Unlimited Rubicon with a Smittybilt XRC Gen 2 Bumper

Question

Question:

I am really sorry about the delay in getting back to you! I sent all of this to our base plate manufacturers and currently they don't have a base plate that will fit your bumper but if you can get me the dimensions of the d-rings on your bumper I can see if one of the D-ring adapters we have will fit. I'd need the thickness or width of them as well as the diameter of the hole.

asked by: John P

0

Expert Reply:

I am really sorry about the delay in getting back to you! I sent all of this to our base plate manufacturers and currently they don't have a base plate that will fit your bumper but if you can get me the dimensions of the d-rings on your bumper I can see if one of the D-ring adapters we have will fit. I'd need the thickness or width of them as well as the diameter of the hole.

expert reply by: Jameson C

0

click to enlarge

John P.

7/16/2019

I am really sorry about the delay in getting back to you! I sent all of this to our base plate manufacturers and currently they don't have a base plate that will fit your bumper but if you can get me the dimensions of the d-rings on your bumper I can see if one of the D-ring adapters we have will fit. I'd need the thickness or width of them as well as the diameter of the hole.

Reply

Jameson C.

7/16/2019

Perfect! The # BX88357 will work for you as it fits the dimensions of your lug pins. For a base plate kit then you'd want the part # BX7420 which is very easy to use, is reliable, and comes with safety cables. For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV. And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest system to set up and use is the Blue Ox Patriot # BLU37TR, that applies the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles. Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry. I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.

Reply

Answer 1

I believe you are asking about the inside depth on the Blue Ox D-Ring adapter #BX88357, which is 1-5/8 inches. I've attached a photo along with some other measurements for you as well, but if the Warn bumper on your 2012 Wrangler Rubicon is an…

view full answer...

Answer 2

For off-road bumpers Blue Ox has two D-ring size adapters available. They have the #BX88358 which is for 1 inch d-rings and they offer the #BX88357 which is for 7/8 inch d-rings. They do not offer a 1-1/8 inch adapter.

view full answer...

Answer 3

Typically when using D-Ring adapters #BX88357 you'll have to snake some shorter cables, like #RM-910648-20 around the frame rail of the vehicle and then out to the front of the vehicle to connect to your safety cables. There's no easy…

view full answer...

Answer 4

In order to choose the correct Blue Ox Aftermarket Off-Road Bumper Adapter for an aftermarket bumper you'll need to measure the d-ring shackle thickness and pin diameter. The max thickness is 1". There is then the part #BX88357 for 7/8"…

view full answer...

Answer 5

We have what you need. I will list them below for you. The Blue Ox Aftermarket Off-Road Bumper Adapter - 7/8" Pin #BX88357 for your 1 inch D-rings. The etrailer SD Non-Binding Tow Bar for Blue Ox Base Plates - RV Mount - 2" Hitch - 6,000…

view full answer...

Answer 6

To connect your Blue Ox tow bar, such as their Alpha #BX7380, to your Wrangler Unlimited's towing bumper's 1-inch D-rings you will want adapter kit #BX88358. This includes the 7/8-inch pins and retaining clips. You can see how this installs…

view full answer...

Answer 7

Thank you for the purchase of the Blue Ox Alpha 2 Tow Bar #BX7380. This issue is likely that it is just stiff right now, and that over time, with more usage it should loosen up.

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The Alpha 2 is indeed an updated version. The difference between the original Blue Ox Alpha and the #BX7380 Alpha 2 tow bar is that the Alpha 2 has non-binding latches, while the original Alpha did not. Non-binding latches, are just that, they easily…

view full answer...

Answer 10

There's really only one difference between the Blue Ox Patriot II Braking System BRK2016 and the Patriot Braking System #BLU37TR. The Patriot #BLU37TR automatically checks the brake pressure to ensure proper setup during install and before and…

view full answer...

Answer 11

The Blue Ox Patriot #BLU37TR operates the brakes of your 2015 Jeep Wrangler Unlimited Sahara just fine. This product applies enough force to the brake pedal that the brakes of your Jeep will apply adequately. The brakes of a vehicle still work when…

view full answer...

Answer 12

If you do not have a 7/8" pin and need a larger one, you will need the Blue Ox Aftermarket Bumper Adapter - 1" Pin #BX88358. This includes pins, clips, washers, and lock nuts and will get you the clearance needed to fit your Smittybilt XRC…

view full answer...

Parts Needed to Flat Tow 2019 Jeep Wrangler Unlimited Rubicon with a Smittybilt XRC Gen 2 Bumper

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching