Is Storage Trunk for Malone MicroSport Trailers Compatible With MicroSport LowBed Trailer  

The Tongue Mounted Crossbar for Malone MicroSport Trailers part #MPG4002 will physically fit the Malone EcoLight Sport Trailer part #MAL53FR but you'll need to trim the upright height and crossbar length. The Malone MicroSport the crossbar kit is…

I have another option for you, but you are correct that the CE Smith Multi Sport Plus Boat and Kayak Trailer w/ Bunks #CE48870 can only handle boats up to 14' long. You instead would need to use the Malone LowBed MicroSport Trailer #MPG464-LB…

We have all of the components you are looking for to turn your MicroSportXT, part #MPG460XT, into a mini boat trailer! For your rollers, I recommend the Dutton-Lainson Boat Trailer Deluxe Roller Bunk, part #DL21741. They have a 5' span so they…

The total length of the Malone MicroSportXT Trailer - 78" Crossbars - Retractable Tongue - 800 lbs #MPG460XT is about 13-1/4' long when extended. When the tongue is retracted all the way, the trailer will measure about 100" long or…

I reached out to my contact at Malone and the Malone LowBed MicroSport Trailer - 78" Crossbars - 800 lbs #MPG464-LB you were looking at measures 138" or 11-1/2' from the coupler to the center of the axle. I included a video of the…

Yes, the Bunk Kit #MPG561 that you referenced will fit and work perfectly on the Malone MicroSport LowBed Trailer #MPG464-LB. I verified this with Malone. This kit includes the two 84" x 4" padded bunks and all the needed mounting…

The Malone LowBed MicroSport Trailer part #MPG464-LB can accommodate boats up to 20' long and has crossbars 78" wide with a capacity of 800 lbs so it will be a great choice for a Sea Eagle FishSkiff 16. In order to secure the boat you'll…

We have one box that fits the Malone Microsport trailers with the part #MPG481 which installs below the bars of the rack. I attached a review video and picture for you to check out as well.

I just checked with Malone and the answer is yes. The Storage Trunk for Malone MicroSport and XtraLight Trailers - Hard Shell - 3.7 cu ft item #MPG481 will also fit the LowMax Sport Trailer. The Malone trunk item #MPG481 measures 14 inches high; it…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hey Tanya, thanks for reaching out! To tow your trailer you'll need a ball mount with a 2" rise and for that I recommend going with the etrailer Ball Mount Kit #EBMK4. This gives you a 2-3/4" rise but that will still work for your…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.