Replacement Axle for Four Winns Tandem Axle Boat trailer
Question:
Tandem axle trailer and I need to replace the rear axle as it’s wearing the left tire terribly. 2” square tubing, 88” hub face to hub face, 70” between spring centers, 5 on 4.5 lug pattern.
asked by: Sean
0
Expert Reply:
None of the 'off the shelf'' trailer axles we offer precisely match those dimensions, but we do have something that could be easily made to work for you. The # 35545I-EZ-89 you mentioned isn't a perfect match, but being a 1/2 inch off on each side on the hub face dimension won't make any difference in ride quality, safety or tire wear. The included spring seats would need to be ground off and and replaced using two # TRSS238. Because this is a round, not a square axle, you'd need a new U-bolt kit, part # APUBR-1.
expert reply by: Mike L
0
Products Referenced in This Question
U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts
- Trailer Leaf Spring Suspension
- U-Bolt Kits
- Camper
- Car Hauler
- Utility Trailer
- 3500 lbs
- Round Axle - 2-3/8 Inch
- 1/2 Inch Diameter
- 5-1/2 Inch Long
- Redline
more information >
Spring Seat for Typical 3,500-lb, Round Trailer Axles with 2-3/8" Diameter
- Trailer Leaf Spring Suspension
- Spring Seats
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Round Axle - 2-3/8 Inch
- TruRyde
more information >
Product Page this Question was Asked From
Dexter Trailer Axle w/ Idler Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 3500 lbs
- 5 on 4-1/2
- 74 Inch
- 89 Inch Long
- No Drop or Lift
- Dexter
more information >
Similar Expert Q&A Pages
- 89 inch 3,500 lb Trailer Axle with 5 on 5 inch Bolt Pattern Trailer Hubs
- Idler Trailer Axle Placement On a Tandem Axle Trailer
- How to Verify Weight Capacity of a 5,080-lb Axle
- Recommended Axle for Boat Trailer with 96 Inch Hub Face and 78 Spring Center
- Can Hub and Brake Drum Be Replaced with Idler Hub on Tandem Axle Trailer
- Proper Spacing Between the Hub Face and Spring Center Locations for 7,000-lb Triple Axles
- Availability of 3,500 lb Trailer Axle with 5 on 4-1/2 inch Bolt Pattern
- Can Square Trailer Axle Be Replaced with Round Axle
- How to Measure for a Replacement Trailer Axle
- Does It Matter If the Spring Center and Hub Face Is Different When Replacing A Trailer Axle
- Looking for Replacement 3500 lb Capacity Axle for 2012 Storm Trailer
- Information Needed to Choose Correct Replacement Trailer Axle
- Tips for Selecting Axles for a Home Made Boat Trailer
- How to Measure an Axle to Pick Out Correct Replacement
- Difference Between Idler and Braking Axle
- How to Find the Overall Width of an Axle with Tires for an 8ft Trailer
- What Measurements are Needed for Picking Out New Trailer Axles
- Determining Axle Length for 6 Foot 6 Inch Wide Trailer
- Can Axle with 87 Inch Hub Face to Hub Face Measurement be Replaced with Axle 35545I-EZ-89
- Determining if Dexter Trailer Axle # 35545I-EZ-89 Will Allow for Frame Clearance with Trailer Tires
- Looking for Replacement Axle for Road King Boat Trailer
- Recommended Replacement Axle and 5-on-4-1/2 Hubs for Pontoon Boat Trailer with 10-Inch Wheels
- Which Way Should Bow of Trailer Axle Face When Installed on Trailer
- Recommended Dexter Axle with EZ Lube Idler Hubs and 70 Inch Spring Seat Centers
- Replacement Axle With 87 Inch Flange to Flange Distance
- Replacement 89-Inch Axle for 6-1/2 x 12-Foot Utility Trailer
- How to Determine Correct Axle Position for Fabricated Ice House Trailer