Channel That Works With Lock N Roll Articulating Coupler  

The Lock N Roll Articulating Channel Tongue Trailer Coupler item #336TS528 would be your best option for attaching one of these systems to the Malone Mega Sport Kayak Trailer item #MPG550-AH. It fits a 2" wide channel and the channel on the Mega…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hey Cody! The MaxxFan Plus Roof Vent w/ 12V Fan and Thermostat item #MA00-04002K will do exactly what you are looking for. It has a manual lift that you can control from the inside of your tear trailer. The lid does not have to be open all the way…

Hey Joel, the Fulton XLT bolt thru jack #F26ZR would be a great option that covers everything you are needing. It is a bolt-on swivel jack with 10 inch of lift. This jack has a 1,500 lb lift capacity which would be way more tongue weight capacity…

The Lock N Roll Articulating Coupler #336TS502 will come with two 5/8" grade 5 coarse thread mounting bolts and lock nuts. These bolts have a recommended torque spec of 112 lb-ft.

When it comes to the wiring for the Dexter Electric Over Hydraulic Brake Actuator, #K71-651: 1. The black wire will connect to the 12V circuit coming from the vehicle's trailer wiring that is always hot. 2. White is the ground. 3. The yellow wire…

Yakima has an awning setup that will work with their round crossbars with the SlimShady roll out #Y36VR but there isn't a way to fit the Batwing Awnings to round bars.

The holes on the Lock N Roll #336VS503505 are spaced 2" apart center on center, so you'll have 4.25" at the lowest/highest and then roughly 2" rise/drop and 0" rise/drop in the various positions it offers.

The Replacement Inner Slide Channel for Dexter Model 6 #T4846500183 has a shank that measures 3" wide x 2-1/2" tall to it's a little smaller than the 3" square shank that comes on the Replacement Inner Slide for Demco DA91…