Does Go Power Portable Solar System # 34282730 Include Plugs for Solar Outlet on Camper  

Yes, MC4 connectors can be used with the Go Power Solar Cable Entry Plate with Red and Black SC4 Cables #34276245.

For 10 foot long Go Power Extension Cables to use with the Go Power Overlander Expansion part #34282182 that you referenced you'd need two of the part #34276216 and you'd be set. These do not require special tools to connect either. The…

From what you are describing it sounds like you are talking about either the nuts on the entry plate or the connectors on the cables. We have the Go Power Solar Cable Entry Plate for MC4 Cables #34273840 for the entry plate and the Redarc MC4…

Solar panels aren't wired like that, they use connectors to plug into the controller, so you won't have to do any wiring at all in order to add another 200 watt panel to your current system, the Go Power Overlander Solar Charging System with…

The Go Power Overlander Solar Charging System with Digital Solar Controller #34282181 in peak conditions is going to recharge approximately 50-60 amp hours a day so you would need to gauge the amount of power you're going to use. To do this you…

The Go Power Solar Panels that we offer such as the Go Power Overlander Solar Charging System with Digital Solar Controller part #34282181 are linked together using MC4 cables. These cables are available using the Go Power MC4 Output Cable with Male…

For the Go Power Overlander #34282181 the brackets that hold it to the roof of the RV require a roof surface of at least 1/2 inch but does not require it to attach to a roof beam.

Thanks for reaching out, Jimmy! It looks like Lippert has had a few different designs for their Level Best controllers over the years. If you can send over the information on any tags for your system or even some pictures of any stickers on the…

For a 3,000 watt inverter you'll need a 300 amp hour lithium battery like the Go Power Sun Cycle Advanced Lithium RV Battery item #GP26QR.