bing tracking image
Q & A Icon

Is the Replacement Caliper for Dexter Titan Premier Disc Brake Kit The Same For Both Sides

Question:

Is it the same caliper for both sides? Should it fit my old rotor? does it matter if the caliper is mounted on top or on the trailing side of the rotor? your customer picture shows it mounted on top, mine were mounted on the trailing two holes of the flange (rear side looking at the trailer)

0

Expert Reply:

The Replacement Caliper for Dexter Titan Premier Disc Brake Kit part # 225CAL is the same for both the driver and passenger side because the brake hose fitting is in the center of the caliper. If you have 10" diameter rotors on your trailer then they will work with the Replacement Mounting Bracket part # KCMB10HRD previously mentioned.

In regards to caliper placement, this isn't super critical for smaller trailers or trailer in general but the best place for them will be with the brake calipers on the trailing side of the axle. The brake mounting flange bolts are symmetrical so you can rotate the Replacement Mounting Bracket if needed.

expert reply by:
0
Conner L

Products Referenced in This Question



Video/Article/FAQ this Question was Asked From

Article or Video
Q & A Icon

Similar Expert Q&A Pages