Solution for Replacement Foot Plate for Lippert Level Up System

Question:

Do you need to keep the cylinder from turning when installing this, if so how, what is the recommendation for torque?

asked by: Russell S

Expert Reply:

The exact replacement foot plate for the Level Up system you have is not available as a replacement. But you could use # LC314667. The issue is that it uses a smaller bolt than the Level Up foot. So you would have to use a 1/2 inch bolt that will thread onto the bottom of the jack leg in place of the 7/16 bolt that comes with # LC314667.

Since this uses a horizontal attachment hole you would not have to worry about the feet turning. You need to torque to 132 ft-lb.

expert reply by: Jameson C