What Does Yellow Wire of 7-Way Molded Trailer Wire Connector H20044 Wire To
Question:
Sorry Jameson but now I'm totally confused. I was referring to the attached chart. The Molded Connector H20044 has 7 wires. The chart only has instructions for 6 wires. There are no instructions on where to connect the yellow wire on molded connector to. I'm assuming my existing wiring is what your chart refers to as "usual trailer wire". Picture attached. I have also attached a picture or your H20044 connector. HELP! I want to get this right the first time. What wire gets connected to what wire???... Thank you.
asked by: Hunter
Expert Reply:
The yellow wire of the 7-way harness part # H20044 that you referenced goes to the center pin of the 7-way which is an aux circuit that is typically used for reverse lights if present on the trailer.
Normally the red wire on a 7-way (RV standard colors) is for the left turn circuit so if you have a red wire I'd not think this would be the correct wire to connect the yellow if the 7-way to. Most likely you'd need to connect it to a yellow wire on your 7-way or to a purple wire. That said, you may not need this circuit connected.
I attached a picture that shows the two ways a 7-way blade connector gets wired by color (left two diagrams) for you to check out.
Product Page this Question was Asked From
7-Way Molded Trailer Wire Connector, 6' Long
- Trailer Wiring
- Trailer Connectors
- Trailer End Connector
- 6 - 10 Feet Long
- Plug and Lead
- 7 Round - Blade
- Hopkins
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Suspension Enhancement
- Q&A: Could Redarc In-Vehicle BCDC Battery Charger Power 3-Way RV Fridge
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Truck Topper
- Video: Review of the Redarc In-Vehicle BCDC Trailer Battery Charger
- Video: Manufacturer Discussion - Redarc Battery Charger
- Search Results: stableload
- Shop: Trailer Wiring
- Shop: Progressive Dynamics 4000 Series RV Converter w/ Charge Wizard and AC/DC Distribution Panel - 60 Amp
- Shop: Redarc In-Vehicle BCDC Trailer Battery Charger - Dual Input - DC to DC - 12V - 12 Amp / Solar 40 Amp
- Shop: 7-Way Molded Trailer Wire Connector, 6' Long
- Search Results: inverter/transfer switch functions rv inverters
- Search Results: dc to dc battery charger
- Shop: Progressive Dynamics 1000 Watt Inverter w/ Transfer Switch
- Shop: Trailer Hitch
- Shop: SuperSprings SuperSway Stops - Qty 4
- Shop: SuperSprings SuperSway Stops - Qty 4
- Video: Progressive Dynamics Pure Sine Wave Inverter Install - 2007 Four Winds Dutchmen Motorhome
- Shop: etrailer Hard Tonneau Cover - Folding - Fiberglass Reinforced Plastic - Matte Black
- Search Results: dc to dc charger
- Shop: Tonneau Cover
- Q&A: Battery Charger and Converter for Enclosed Car Hauler
- Video: All You Need to Know About the Redarc In-Vehicle BCDC Battery Charger
- Search Results: 331~bcdc1225d
- Search Results: red76fr
- Search Results: red86fr
- Q&A: How To Charge A Battery On A Trailer While Towing With 2013 Honda Odyssey
- Video: Comprehensive Review: Hopkins 7-Way Blade Style Connector with Molded Cable
- Video: Breaking Down the 14 Gauge Primary Wire
- Shop: Brake Controller
on Trailer Wiring
Hunter
10/16/2019
Sorry Jameson but now I'm totally confused. I was referring to the attached chart. The Molded Connector H20044 has 7 wires. The chart only has instructions for 6 wires. There are no instructions on where to connect the yellow wire on molded connector to. I'm assuming my existing wiring is what your chart refers to as "usual trailer wire". Picture attached. I have also attached a picture or your H20044 connector. HELP! I want to get this right the first time. What wire gets connected to what wire???... Thank you.