Dimensions of Buyers Products 50 Ton Air Compensated Pintle Hook 337PH50  

The Buyers Products 45 Ton Pintle Hook #337PH45 has a unique bolt pattern unlike others. I do agree the Clip #3370070055 does not seem sufficient, but the handle is spring loaded so the likely hood of it opening on its own would be next to impossible…

I went out to our warehouse and measured the Buyers Products 45 Ton Pintle Hook #337PH45 for you. The mounting platform where the holes are drilled, has a thickness of 0.7 inches.

I went to our warehouse and measured the Buyers Products 50 Ton Air Compensated Pintle Hook #337PH50 to get the height dimensions. The overall height of the pintle when open is 12" and when closed is 9-1/2". I also took a measurement for…

The upper holes for the Buyers Products 45 Ton 4-Hole Air Compensated Pintle Hook #337P45AC4 are spaced 5-1/4" on center. The lower holes are spaced 6-1/2" on center. The distance from the upper holes to lower holes are spaced 3" on…

Curt does not have a minimum plate thickness that they recommend for the #C48231 to ensure its full capacity, instead they recommend attaching it to a surface that is also rated for as much capacity as needed. So, if the bumper/plate is rated for 60k…

The Buyers Products 50 Ton Air Compensated Pintle Hook #337PH50 has a bolt pattern that is 5" on center from the left to right holes. The Top to middle holes are 2-3/8" on center and the middle to bottom holes are 2-1/8" on center. The…

The bolt holes from left to right on the Buyers Products Pintle Hitch Plate Mount part #337PH50 are separated by 5 inches and from the top to middle the distance is 2-3/8 inch and then from middle to bottom is 2-1/8 inch.

It's really just a different bolt hole setup for either. The #337PH50 has 6 bolts and the larger #337PH55 has a 10 bolt setup. This gives a little more flexibility in how it can mount but overall either will do just as good of a job as the…

The Buyers Products 50 Ton Air Compensated Pintle Hook #337PH50 that you referenced features 3/4 inch diameter bolt holes. Buyers Products recommends using 3/4 inch Grade 8 bolts to install the assembly. Please just note that this particular pintle…

The Buyers Products 30 Ton Pintle Hook part #337PH30 is designed for a lunette ring that has a 2-3/8" to 3" inner diameter with 1-3/8" to 1-5/8" diameter section such as the Buyers Products Heavy-Duty Forged 4-Bolt Mount Lunette…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The Buyers Products 45 Ton Pintle Hook #337PH45 does not have the 4 inch square bolt pattern but rather uses a different pattern. Vertically the holes are 3 inches on center. Horizontally the top row is 5-1/4 inches on center and the bottom is 6-1/2…