How to Reset Zero Point Calibration on Lippert Ground Control 3.0
Question:
How do you reset the self-leveling I have trouble at all not level out completely
asked by: Chris B
Expert Reply:
It sounds like you need to re-calibrate the zero point on your Lippert Ground Control 3.0 # LC304136 system. Below I've listed out the steps you'll need to follow and will allow you to use the auto leveling again.
Zero Point Calibration
The “Zero Point” is the programmed point that the trailer will return
to each time the Auto Level feature is used.
Note: Prior to starting this procedure, double check all connections
on the controller, jacks, and touch pad.
1. In manual mode, run the jacks to level the trailer. This is best
achieved by placing a level in the center of the trailer and leveling
it both front to back and then side to side. (See “Basic Jack
Operation” for instructions on how to manually operate the system).
2. Once the trailer is level, turn off the touch pad.
3. With the touch pad off, press and release the “FRONT” button five (5) times and then press and release the “REAR” button five (5) times.
4. The touch pad will flash and beep and the display will read “ZERO
POINT CALIBRATION ENTER to set, Power to Exit”.
5. To set the current position as the zero point, press the “ENTER”
button.
6. LCD display will read “Zero point stability check”.
7. LCD display will read “Zero point set successfully” once process is
complete.
8. The system will set this point as its level state and the touch pad
will turn off.
If this doesn't solve your problem, please let me know and I will continue to help you troubleshoot.
Jerry N.
1/11/2021
I tried the above pushing front then rear 5 times, nothing, then I tried the 10 time method, nothing. I don’t get any sound and the system doesnt turn itself on. Before I started to reset the zero, the system said one of the jacks was out of sink, so 8 manually leveled it. Can u think of why my system doesn’t set to zero?
Jon G.
1/15/2021
Vern
11/22/2024
can I recalibrate auto level from touch screen inside of rv 2023 forest river crusador
Product Page this Question was Asked From
Replacement Control Module for Lippert Ground Control 3.0 Electric Leveling System
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Controllers
- Control Module
- Lippert
more information >
Continue Researching
- Shop: Fifth Wheel Hitch
- Shop: Trailer Wiring
- Shop: Replacement Control Module for Lippert Ground Control 3.0 Electric Leveling System
- Shop: Suspension Enhancement
- Shop: Replacement Front Jack for Lippert Ground Control 3.0 Leveling System
- Shop: Advent Air Replacement RV Air Conditioner for Dometic Setup - Start Capacitor - 15,000 Btu - White
- Shop: Replacement Lippert Leveling Control Brain for 4-Point Leveling System
- Shop: Replacement OneControl Advantage Controller for Lippert Level Up RV Leveling Systems
- Shop: Trailer Hitch
- Shop: TorkLift GlowStep Revolution Uprising Steps w/ Booster Step - 4 Steps - 28" Base - 325 lbs
- Q&A: How to Clear Error Code on Lippert Ground Control Leveling System
- Shop: RV Roof Membrane
- Search Results: lippert 807615
- Shop: Replacement 6-Point Controller for Lippert Components Ground Control 2.0 Electric Leveling System
- Video: A Closer Look at the B&W Tow & Stow Ball Mounts Serrated Hitch Mounted Step
- Video: 6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles Review
- Video: Review of Lippert Replacement OneControl Advantage Controller Level Up RV Leveling Systems - LC88TF
- Search Results: 13398~c2
- Search Results: 60692
- Search Results: 803280
- Search Results: tcg70~8~20
- Search Results: am20761b
- Search Results: bh~3mfs~7
- Video: Replacement Front Jack for Lippert Ground Control 3.0 Leveling System Review
- Video: Review of Lippert Camper Jacks - Replacement Jack Assembly - LC25AF
- Q&A: Does Cooper Work Series 215/75R17.5 Radial Tire w/ 17-1/2" Wheel Come Balanced
- Shop: Tonneau Cover
- Q&A: Front And Rear Sway Bars For A 2021 Coachmen Sportscoach SRS 365RB Diesel Pusher
- Q&A: Trailer Light Fuse Locations On A 2015 Ford F-250 Super Duty
- Video: Hands-On with the Ultra-Fab Hitch Mounted Steel Rollers for RVs w/ 2-1/2" Hitch Tubing
on Accessories and Parts
Rick B.
7/4/2020
I am having trouble with reset procedure it can't work unless all jacks are extended several inches. my problem started when dealer returned unit with dead battery they used system until it failed from low voltage when I try to reset system the first thing it does is try to retract center jacks They are retracted so it aborts procedure. I can't seem to find procedure to lower center jacks manually can you help