2020 Honda Odyssey Hitch With Best Ground Clearance  

Yes, there is a trailer hitch receiver that fits your 2024 Honda Odyssey, from Curt, at the following part number: - Curt Trailer Hitch Receiver #C64NR I verified this fit directly with the manufacturer for you.

Yes, the Curt Trailer Hitch Receiver #C64NR is included on etrailer.com and does fit the 2022 Honda Odyssey.

For your 2022 Honda Odyssey I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit #76170. From what we have found this hitch is the least visible. It has a concealed cross tube so you will only see the receiver hanging down below…

For a trailer hitch confirmed as a fit for your 2018 Honda Odyssey the part #C13370 is a confirmed fit and would work well for towing or carrying a cargo carrier like you mentioned. Since this is a 2-inch hitch receiver, you will have a wide variety…

Both the Tekonsha T-One Vehicle Wiring Harness #118781 and the Curt #C56382 T-Connector are custom harnesses designed specifically for your 2020 Odyssey, and will plug into the same factory port behind the driver side trim panel. In terms of function…

The best class III hitch that will give you the highest ground clearance on your 2022 Honda Odyssey is the Draw-Tite Max-Frame #76170, which will give you approximately 12 inches of clearance under the receiver tube.

The difference between the Curt #C56382 and the Tekonsha T-One #118753 for your 2018 Honda Odyssey is that the Curt is for if the fuse locations actually have pins in them. The Tekonsha option is for if the fuse locations are lacking the pins to…

The most hidden trailer hitch we have for your 2020 Honda Odyssey is the Draw Tite part #76170. Only the hitch opening hangs below the rear bumper so you only see the hitch opening. This also helps with ground clearance. I attached a picture that…

The biggest difference between the Curt Trailer Hitches, #C64NR and the etrailer #e98855, is the #C64NR hitch sits up closer to the bumper which will give you a little more clearance between the bottom of the hitch and the ground. The Curt #C64NR is…

Typically (at least up until now) the biggest benefit of a factory trailer hitch was that they tended to have a more hidden design, thus providing an overall cleaner appearance at the rear of the vehicle for a "from-the-factory" look. The…

For your 2018 Honda Odyssey the Draw Tite hitch part #76170 is a confirmed fit. I attached a picture that shows the install instructions for this hitch for you to check out as well.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…