Parts Needed to Convert 4-Way of 2010 Hyundai Santa Fe to 7-Way and Install Brake Controller
Question:
What do I need to convert my 4 pin flat plug to a round plug and add a brake controller? Thanks.
asked by: Larry H
0
Expert Reply:
The adapter part number you need to convert your 2010 Hyundai Santa Fe's 4-way to a 7-way and install a brake controller is the part # ETBC7. This comes with everything needed to easily make the conversion and wire up a brake controller as well. I attached an install video for this kit that shows it install on a similar 2012 Hyundai Santa Fe for you to check out as well.
For a brake controller the Brake EVN # TK63VR is a really great option. It is a lower priced proportional controller that senses how hard you are applying the vehicle brakes and will apply a relative amount of braking pressure on the trailer brakes as well.
expert reply by: Jameson C
0
Products Referenced in This Question
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kit
- etrailer
more information >
Tekonsha BRAKE-EVN Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Automatic Leveling
- Under-Dash Box
- Up to 4 Axles
- LED Display
- Up to 90 Degrees
- Tekonsha
more information >
Product Page this Question was Asked From
T-One Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Similar Expert Q&A Pages
- Trailer Hitch & Wiring Harness For 2011 Hyundai Santa Fe Limited to Tow Boat Trailer
- 4-Way Trailer Wiring for a 2010 Hyundai Santa Fe with or Without a Factory Tow Package
- Trailer Wiring Harness for a 2011 Hyundai Santa Fe GLS
- Installing 5-Way Trailer Connector Adapter On My 2011 Hyundai Santa Fe w/ Tow Package
- Trailer Wiring Recommendations for a 2011 Hyundai Santa Fe
- What is the Correct Trailer Wiring Harness for the 2010 Hyundai Santa Fe SE with Towing Package
- Purpose of Grommet on Replacement Tow Package Wiring Harness Part # 118258 on 2010 Hyundai Santa Fe
- Is Trailer Wiring for 2012 Hyundai Santa Fe Compatible with LED Trailer Taillights
- Installing 5-Way Trailer Connector On My 2011 Hyundai Santa Fe w/ Tow Package
- Comparison of Trailer Wiring Harnesses # 118415 and # 118258 for a 2009 Hyundai Santa Fe
- Installation of Replacement OEM Tow Package Wiring Harness 118258 On a 2008 Hyundai Santa Fe
- Can the Trailer Wiring Converter be Mounted Under a 2012 Hyundai Santa Fe Inside of a Tube
- Installing a 4-Way to 5-Way Trailer Wiring Adapter on a 2011 Hyundai Santa Fe SE
- 5-Way Trailer Wiring Harness Needed for Surge Brakes
- Installation of Draw-Tite Tow Package Wiring Harness # 118258 on a 2010 Hyundai Santa Fe
- Trailer Wiring Recommendation for 2012 Hyundai Santa Fe
- What Size Fuse Does The Draw-Tite Custom Fit Vehicle Wiring # 118258 Use For 2008 Hyundai Santa Fe
- Troubleshooting Trailer Wiring for 2007 Hyundai Santa Fe with No Power to Pins
- Trailer Wiring Harness for a 2012 Hyundai Santa Fe without Factory Tow Package
- Installing a Brake Controller on a 2010 Hyundai Santa Fe with Factory Tow Package
- Weight Distribution Hitch Recommendation for a 2010 Hyundai Santa Fe Front Wheel Drive
- Will The T-One Wiring Harness for Factory Tow Package 4 Flat # 118258 Fit A 2009 Hyundai Santa Fe?
- Picking Out Trailer Wiring and Brake Controller for 2012 Hyundai Santa Fe
- Trailer Wiring Harness Options for a 2011 Hyundai Santa Fe
- Correct Wiring Harness to Provide a 4-Way Trailer Connector on a 2007 Hyundai Santa Fe LTD
- 7-Way Trailer Connector Installation-2012 Hyundai Santa Fe
- Correct Trailer Wiring Harness for a 2011 or 2012 Hyundai Santa Fe with Towing Package
- Troubleshooting New Tekonsha Trailer Wiring Not Working for 2012 Hyundai Santa Fe
- How to Determine if a 2009 Hyundai Santa Fe has a Tow Package
- Parts Needed to Convert a 4-way to a 7-way on a 2009 Hyundai Santa Fe to Charge Trailer Battery