Attaching JT's Strongarm Stabilizers to 2019 Grand Design Momentum Toy Hauler with Levelup
Question:
My Toy Hauler has hydraulic landing gear and it looks like I will have to add a cross support for the rear jacks. Do you have some better instructions or a video on installing the front and rear? Everything I have found has been for the electric system with the square adjustable feet. Your help will surely be appreciated.
asked by: Curtis
1
Helpful Expert Reply:
Can you send me a picture of the feet of your jacks? How far apart are they?
click to enlarge
click to enlarge
click to enlarge
helpful expert reply by: Jameson C
1
Question:
Attached is a picture of the foot and the jt strong arm and lug. It appears the lug is too big and will not fit into the arm connector. Any ideas of what to do would be appreciated.
asked by: Curtis
1
Helpful Expert Reply:
Thanks for the picture! So I spoke with Lippert who makes the LevelUp landing gear setup you have as well as the JT's Strongarm and they told me that the fork of the arm does not go over the lug adapter. If you check out the pictures I attached you can see how it all fits together properly.
click to enlarge
click to enlarge
click to enlarge
helpful expert reply by: Jameson C
1
Product Page this Question was Asked From
JT's Strong Arm Jack Stabilizer Kit for 5th Wheel RVs w/ 58" or More Between Landing Gear
- Camper Jacks
- Fifth Wheel Camper
- Stabilizer Jacks
- Steel
- 6 Jacks
- Lippert
more information >
Featured Help Information
Instructions
Similar Expert Q&A Pages
- Landing Gear Stabilizer Recommendations for 2020 Sabre Fifth Wheel 36BHQ
- Does JT Strong Arm Kit # LC191023 Come with Brackets to Attach to Front Landing Gear
- Length of Tubes when Extended for JT's Strong Arm Jack Stabilizer Kit # LC191023
- Will JT's Strong Arm Jack Stabilizer Kit Support 6,500 lb Rated Landing Gear
- Will JT's Strong Arm Jack Stabilizer Kit work with Hydraulic Stabilizer Jacks
- Extended and Retracted Dimensions of JT's StrongArm Jack Kit # LC191023
- JT’s Strong Arm Replacement T-Handle
- Can JT's Strong Arm Jack Stabilizer Kit be Used on Round Hydraulic Landing Gear Jacks
- JT's Strong Arm Stabilizer Replacement Outer Stabilizer and T-Handle
- Do JT's Strong Arm Jack Stabilizer Kit Release For Landing Gear Pads Need to be on Side
- JTs Strong Arm Jack Stabilizers for 5th Wheel Over Or Under 58 between landing Gear
- Troubleshooting of JT's Strongarm Adapter that's too Wide to Install
- Recommended Replacement Venture Landing Gear Motor and Gearbox for 2008 Forest River Sandpiper
- How to Pick Out JTs Strong Arm Jack Stabilizers for a Trailer
- Product Comparison Of MORryder Scissor Jack Cross Brace And JTs Strong Arm Jack Stabilizer Kit
- How to Install the Lippert Components JT's Strong Arm Jack Stabilizer Kit # LC191023 on RV
- Recommended Best Stabilizer System for 2018 Grand Design Reflection 28BH
- Installing JT Strongarm Stabilizer on a 16 Grand Design Reflections 337RLS 5th Wheel w/4 pt Leveling
- Making Modifications to Lippert 6.0 Leveling System on 2017 Cedar Creek Champagne 38EL
- Replacement Parts for JTs Strong Arm Jack Stabilizer
- Can JTs Strong Arm be Used on a Fifth Wheel Trailer that has Lippert Level Up System
- Correct JT's Strong Arm Jack Stabilizer Kit for a 2021 Forest River Aurora Travel Trailer
- JT's Strong Arm Jack Stabilizer 91023 for 2018 Grand Design Reflection
- Using JT's Strong Arm Jack Stabilizer Kit With Round Self-Leveling Jacks
- How to Use JTs Strongarm Jacks with Lippert Electric Stabilizer Jacks
- Recommended Stabilization for Round Hydraulic Jacks