Determining Hitch Height Needed To Tow Trailer Level On 2020 GMC Sierra 3500

Question

Question:

What height setting do I use to get my trailer leveled up? A 15-1/2' horse trailer pulled by a 2020 GMC Sierra 3500

asked by: Tommy R

0

Expert Reply:

The correct height setting is going to vary by trailer but you can get there taking some measurements.

First make sure your trailer is on level ground and then measure from the ground up to the bottom of the king pin. Then on your truck take a measurement from the ground to the truck bed floor where the hitch will sit. The difference in these two measurements will give you the hitch height so that the trailer is level.

Next take a couple measurements to see what kind of bed rail clearance you will have. At least 6 inches of clearance from the top of the bed rails to the trailer overhang is a good guideline (see attached image).

An adjustable height 5th wheel like the # B&W Companion # BWRVK3775 is often a good option providing flexibility with 3 different hitch height settings between 17-19". Included is a video resource with more information on the Companion and a diagram to help with your measurements.

expert reply by: Patrick R

0

click to enlarge

Ken J.

4/13/2020

what if I only have 12.5 from my bed to the king pin for a level RV ,

Reply

Chris R.

4/15/2020

We do have some pretty low-profile hitches that could get you at (or close enough) to that height. The Curt A16 # C16120 for example has a minimum height setting of 13". If you can tell me what truck you have (and if it's equipped with a factory puck system) I would be happy to make a specific recommendation.

Reply

Ken J.

4/16/2020

I have a 2020 chevy Silverado 3500 standard bed and I would like to stay with B&W

Reply

Chris R.

4/17/2020

Thanks for the info! I definitely understand wanting to stick with B&W, but there's not a shorter option from them that would keep your setup level as-is. The slider Companion # BWRVK3400-5W adjusts from 17" to 19" tall while the fixed # BWRVK3500-5W has a minimum height setting of 16-1/4". If you go this route you may need to raise the trailer so it doesn't ride nose high when hooked up.

Reply

Answer 1

The B&W Companion Slider #BWRVK3775 is really hard to argue with as being the best sliding 5th wheel hitch for your 2022 GMC Sierra 2500 with the puck system. Not only is it a great hitch when it comes to quality, but it also has the mounting…

view full answer...

Answer 2

The answer is absolutely yes, SumoSprings will unequivocally help with the ride and handling of your 2021 GMC Sierra 3500 when you are towing your 5th wheel trailer. The correct fit for your '21 Sierra 3500 is the following: - SumoSprings Rebel…

view full answer...

Answer 3

Yes it does! The B&W Companion 5th Wheel Hitch #BWRVK3600 that fits your 2018 Ram 2500 with the factory puck system is completely compatible with a MORryde cushioned pin box. This is a fantastic set up, giving you a cushioned pin box along with…

view full answer...

Answer 4

For your 2021 GMC Sierra 2500 4WD I recommend the SumoSprings Rebel Custom Helper Springs - 2 Piece - Rear Axle #SSR-203-40-2. These jounce-style springs have a 3,000 lb capacity and will keep your vehicle level while you're towing. They also…

view full answer...

Answer 5

We still recommend the use of a slider in all standard/short bed trucks. That being said, the new GM trucks like your 2022 GMC Sierra 2500 do have a slightly longer bed than the typical standard bed. The best thing you can do is to measure to see if…

view full answer...

Answer 6

I do like to suggest the B&W hitches to our neighbors, they build great products. Glad to see you are going that route. We have two options I'll suggest for you that fit your new 2022 GMC Sierra 2500, the fixed hitch type B&W Companion…

view full answer...

Answer 7

The arms that hold the head of the B and W Companion hitch part #BWRVK3710 are designed to be installed in various positions to allow for different height and offset settings. If you check out the picture I attached you can see the different ways…

view full answer...

Answer 8

While it is recommended to use a sliding 5th wheel for a short bed truck so that you have plenty of clearance for sharp turns, it is not necessarily required as it depends on your truck and trailer configuration. If you are using the same trailer…

view full answer...

Answer 9

We normally recommend short beds to use a slider like you mention for clearance issues. The B&W Companion Slider for the 2020 Chevrolet Silverado 3500 with OEM prep package is not available yet. It is expected to be available September of 2019.…

view full answer...

Answer 10

Since your 5th wheel trailer has a tapered nose there is a good chance that you can use the B&W Companion OEM 5th Wheel Hitch #BWRVK3710 in your 2022 Chevrolet Silverado 2500 with prep package and 6-3/4' bed. However you will want to verify…

view full answer...

Answer 11

To confirm a fit for a fifth wheel hitch, and other products, either the manufacturer or us at etrailer have to either confirmed the fit ourselves or have been notified that it will be a fit. Often, it is about getting the vehicle in to test it. The…

view full answer...

Answer 12

It is possible that you will not need a sliding 5th wheel hitch like the B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package #BWRVK3775 depending on the design of the nose and width of your trailer. The only way to know…

view full answer...

Determining Hitch Height Needed To Tow Trailer Level On 2020 GMC Sierra 3500

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching