Curt Hitch Recommendation for a 2012 Kia Sorento that is Compatible with a Full Size Spare
Question:
can a full size spare fit with this hitch or do you have any hitches that will allow a full size spare to fit? just bought new sorento, dealer installed hitch, now full size spere I bought wont fit
asked by: Steve
0
Expert Reply:
The Curt Hitch # C13073 is compatible with your vehicle and allows a full size spare to be used when in installed. Check out the picture I attached that shows this hitch installed on a vehicle similar to yours and a full size spare underneath the rear of the vehicle.
I attached installation instructions and an installation video for this product for you to check out also.
To complete your towing setup you may be interested in the following products:
Curt Custom Fit Vehicle Wiring # C56328 (installation instructions attached)
Draw-Tite Ball Mount # 2923
Hitch Ball with 2 inch Diameter # 19247
Hitch Ball with 1-7/8 inch Diameter # 19260
Hitch Pin and Clip # PC3
click to enlarge
expert reply by: Jameson C
0
Products Referenced in This Question
1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 2000 lbs GTW
- Class III
- Draw-Tite
more information >
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- Class III
- 7500 lbs GTW
- Draw-Tite
more information >
2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Tow Ready
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-1/4" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- 5/8 Inch Diameter
- 4 Inch Span
- Draw-Tite
more information >
Product Page this Question was Asked From
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class II
- 300 lbs TW
- 3500 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Similar Expert Q&A Pages
- How is the Spare Accessed when a Draw Tite Hitch # 36511 is installed on 2012 Hyundai Santa Fe
- Solution for Weld Nuts on 2012 Hyundai Santa Fe that Won't Allow Hitch Bolts to Thread In
- Parts Needed to Tow Trailer with 2013 Kia Sorento LXI4
- Does the Draw Tite hitch # 36511 Block Spare from Being Raised or Lowered
- Does the Class II Draw-Tite Trailer Hitch Install the Same as the Class III on a 2012 Kia Sorento
- Recommended Towing Package For 2011 Kia Sorento 4 Cylinder
- Hitch Classes Available for a 2013 Kia Sorento 4 Cylinder
- What Kind of Hardware is Included w/ the Draw-Tite Hitch for a 2010 Hyundai Santa Fe?
- Trailer Hitch Recommendation for 2011 Hyundai Santa Fe for Thule Bike Rack