Dimensions of Bulldog Collar-Lok Coupler BD028585  

I have a solution for you, but Titan does not offer their Bolt-On Coupler for 2-5/16 Inch Ball #T4855300 in a 2 inch hitch ball design. For a bolt-on trailer coupler with a trigger latch, designed for a 2 inch ball I recommend the Demco Trailer…

I was able to get a dimensional drawing from Buyers Products which I have attached below. The Buyers Products Coupler w/ 5-Position Adjustable Channel - Weld-On - 2" Ball - 10,000 lbs #3370091545 has 6 mounting holes on each side, providing 5…

The Demco 6-Hole Adjustable Channel Bracket #DM66134 is pretty thick. The steel thickness used for this is 7/16 of an inch.

The depth of the channel of the Demco 6-Hole Adjustable Channel Bracket #DM66134 is 2-1/8 inches. This is a standard depth for this type of channel.

For a channel bracket to go along with the Demco 2-Tang Clevis #DM05593-97 that you referenced you would want the Demco 6-Hole Adjustable Channel Bracket #DM59601. This bracket gets welded on, for the hardware to secure the #DM05593-97 to the…

Adjustable trailer couplers are not going to mount to your truck; they will attach to the frame of your trailer. Some of the adjustable couplers, such as the Bulldog Cast Head #BDA2563C0317 come with the mounting hardware to weld onto the frame of…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

Good morning, Cliff. As of today (3/27/24) we are expecting the #KE33JR tire/wheel combo to be in stock in about 2 weeks. Hopefully this means we can take our own pictures and put them on the site within maybe about 3-4 weeks from now. What I can…

You can convert surge brakes to an electric over hydraulic braking system. To do this, you will need an electric over hydraulic actuator and a brake controller. For an electric over hydraulic actuator, I recommend looking at the Carlisle HydraStar…