bing tracking image
Q & A Icon

Is Kenda Karrier S-Trail ST145/R12 Available Mounted on Wheel with 4 on 4" Bolt Pattern


Do you sell this product I have been reading about mounted on a wheel? Kenda Karrier S-Trail ST145/R12 Radial Trailer Tire - Load Range E 1550 pounds each tire. I have the 480x12 and a one inch over all tire height Meaning 1/2 inch from the center of the hub is fine. as long as the wheel is 4 lug. This trailer was orginal A starcraft pop up I bought new but I made a 4 wheeler trailer/General Purpose out of it and buy new wheels and tire from a supermarket every year and Im sick of it. Is there a F? It can be a 13 or 14 or 15 inch 4x4 wheel as long as its not over the 145. Thanks


Expert Reply:

While we do carry the Kenda Karrier S-Trail ST145/R12 Radial Trailer Tire - Load Range E (1,520 lbs at 80 psi per tire) # AM10140, we unfortunately don't have this specific tire pre-mounted to a wheel that has a 4 on 4" bolt pattern.

Since all of the 12" wheels that have a 4 on 4" bolt pattern have lower weight capacities (1,250 lbs at the most) I recommend checking out the Kenda Karrier S-Trail ST145/R12 Radial Tire Load Range D (1,220 lbs at 65 psi) w/ 12" White Spoke Wheel # AM35351DX. This has the lower weight capacity of 1,220 lbs per tire but it does come already mounted on a wheel with a 4 on 4" bolt pattern. If you can find a 12" trailer wheel out there with a higher weight capacity then you can definitely use this tire with it though.

The only other solution is to use the Kenda 205/65-10 Bias Trailer Tire with 10" White Wheel # AM3H460. This has a Load Range E (1,650 lbs at 90 psi) but the tire has an 8.4" section width which is substantially wider than the 5.7" of your current tire.

expert reply by:
Jon G

Products Referenced in This Question

Product Page this Question was Asked From

Q & A Icon

Similar Expert Q&A Pages

See More Q&A Expert Answers >>