bing tracking image
Q & A Icon

What Tools Are Required To Install the Draw-Tite Hitch 36660 On a 2019 Ford EcoSport

Question:

what tools would be required to install the trailer hitch?

0

Expert Reply:

In order to install the Draw-Tite Trailer Hitch Receiver part # 36660 on a 2019 Ford EcoSport you will need the following tools.

- Ratchet
- 5.5mm, 10mm, 15mm, 17mm, and 3/4" Sockets
- Utility Knife
- Marker
- Torque Wrench
- Pry Bar
- 6" Socket Extension
- Tape Measure

I will say that the majority of basic hand tool sets will have all of the above components needed to install the trailer hitch except for the toque wench. However, the torque wench can be rented from a local auto parts store (most are free) or you can get the 1/2" Drive Torque Wrench part # PTW3001C and have it arrive with your hitch. I have attached an installation video for you as well but the process is pretty easy for those even with little to no mechanical experience so you shouldn't have too many worries about this process.

expert reply by:
0
Conner L

Products Referenced in This Question


Product Page this Question was Asked From


Q & A Icon

Similar Expert Q&A Pages

See More Q&A Expert Answers >>