Best Autosliding 5th Wheel Hitch for a 2020 Ford F-250 Super Duty  

Yes. The Demco Hijacker Autoslide 5th Wheel Trailer Hitch w/ Slider - Single Jaw - Above Bed - 18,000 lbs #DM8550034 is compatible with industry standard base rail kits like your Reese rails. You won't need new rails to install this hitch.

An autoslide 5th wheel hitch is going to make your life much, much simpler if you are towing a 5th wheel trailer with a short bed truck like your 2019 Ford F-250 Super Duty. The best autoslide hitch is the Demco Hijacker because of its highly secure…

The Under-Bed Rail and Installation Kit for Reese Elite Series 5th Wheel Trailer Hitches #30068 was discontinued and is only compatible with commercial 34 inch frames, so it won't fit your 2019 Ford F-350. I reached out to Reese and they…

There are different versions of the Demco Hijacker Autoslide 5th wheel hitch that are made for different applications. For instance 13K hitch model #DM8550040 does fit into industry-standard above-bed base rails (ISRs) like #C16430-204 from Curt or…

Since we don't carry the PullRite line I can't really speak to their quality but from what I can see from there website their 2900 model is fairly similar to the Demco Autoslide 5th Wheel Hitch w/ Slider #DM89GV. Both hitches offer 14"…

Thank you for the photo of your 2016 Ram 3500's bed rail which sits 59-inches above ground. You are correct that the recommended minimum clearance between a bed rail and the underside of the trailer's overhang is 5 to 6-inches, as shown in…

The answer to your question will depend on the nature of the front of the 5th wheel you purchase. It looks like your Coachmen Chaparral has the rounded nose, so you might get by without a slider on flat ground but given the consequences of what could…

It doesn't really matter if you leave the jaws of your Reese 5th Wheel Trailer Hitch #RP30047 open or closed when not in use. Most people will just leave the jaws of their hitch closed until they're ready to couple to the trailer, but it…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…