Trailer Hitch Receiver Fit for 2-Wheel Drive 2016 Honda HR-V
Question:
24932. Can this hitch fit the 2wd/LX version of the HRV? What would it require? Thanks.
asked by: David
Expert Reply:
There is a trailer hitch receiver that fits your 2-wheel drive model of 2016 Honda HR-V, but not the one you referenced because it is only a fit for the all-wheel drive. The two trailer hitches that fit your '16 HR-V with 2WD are the Curt Trailer Hitch Receiver # C11416 (pictured) and EcoHitch Hidden Trailer Hitch Receiver # 306-X7322.
Of these two I recommend the option from Curt because it is more economical and simpler to install. I have added a link to a video install of the Curt on a '16 HR-V as well as the installation instructions for you to take a look at.
Additionally, if you plan on doing some light towing with this hitch you'll need T-One Vehicle Wiring Harness # 118673 (I've also linked an install video for this harness on a '16 HR-V), Ball Mount # C45521, Pin and Clip # F-4, and either 1-7/8" Hitch Ball # A-80 or 2" Hitch Ball # A-82, depending on the size of your trailer's coupler.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Stainless Steel - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Stainless Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- CURT
more information >
2" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Stainless Steel - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Stainless Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- CURT
more information >
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- CURT
more information >
Curt Hitch Pin and Clip for 1-1/4" Hitches - 1/2" Diameter x 2" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- 2-1/2 Inch Long
- Fits 1-1/4 Inch Hitch
- 1/2 Inch Diameter
- 2-1/2 Inch Span
- CURT
more information >
Product Page this Question was Asked From
EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class II
- 300 lbs TW
- 2000 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- EcoHitch
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Hitch Receiver Compatibility for a 2022 Honda HR-V
- Q&A: 2" Trailer Hitch Receiver For Carrying A Cargo Carrier Behind a 2017 Honda HR-V
- Q&A: Recommended 2 Inch Trailer Hitch Receiver for Bike Rack on 2016 Honda H-RV
- Article: Best Bike Racks for Electric Bikes
- Q&A: Which Hitch Receiver Size is Better 1-1/4 inch or 2 Inch
- Q&A: Can the 12 Volt Power Wire from a Trailer Wiring Harness Tap Into a 12 Volt Accessory Outlet
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What 2" Hitch Fits My 2018 Honda HR-V?
- Q&A: Installation of the Curt T-Connector # C56284 for 2018 Honda HR-V
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Article: Trailer Hitch Installation Tips
- Article: My Trailer Hitch Doesn't Fit
- Article: How Much Trailer Can I Really Tow