How to Determine if a 2009 Hyundai Santa Fe has a Tow Package
Question:
How can I confirm if my 2009 Santa Fe has a factory installed tow package so I will know which wiring to order? Thanks
asked by: BC
0
Expert Reply:
From the research I did the easiest way to determine if you have a tow package would be to check to see if your 2009 Hyundai Santa Fe has a transmission cooler mounted in front of the radiator. A transmission cooler looks basically like a miniature radiator that will be mounted in front of the radiator.
If your vehicle has a transmission cooler then you know it has a tow package. You can also look under the driver side wheel well to see if the connections are there. Check out the video I attached at the 2:07 mark to see where the connections are and what they look like.
Another option if the above would not work for you would be to have a Hyundai dealer run the VIN number of your vehicle. They will be able to tell from that.
I also attached installation instructions for this product for you to check out.
expert reply by: Jameson C
0
Product Page this Question was Asked From
T-One Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Similar Expert Q&A Pages
- Picking Out Trailer Wiring and Brake Controller for 2012 Hyundai Santa Fe
- Trailer Wiring Recommendations for a 2011 Hyundai Santa Fe
- 5-Way Trailer Wiring Harness Needed for Surge Brakes
- Wiring Harness and Towing Setup Recommendation for a 2008 Hyundai Santa Fe
- 7-Way Trailer Connector Installation-2012 Hyundai Santa Fe
- 4-Way Trailer Wiring for a 2010 Hyundai Santa Fe with or Without a Factory Tow Package
- Recommended Trailer Wiring Harness for a 2010 Hyundai Santa Fe with Factory Tow Package
- Trailer Wiring Harness Options for a 2011 Hyundai Santa Fe
- 4-Way to 5-Way for 2020 Hyundai Palisade to Be Able to Tow Trailer With Surge Brakes
- Correct Trailer Wiring Harness for a 2011 or 2012 Hyundai Santa Fe with Towing Package
- Can the Draw-Tite Wiring Harness # 118258 be Installed Outside of a 2012 Hyundai Santa Fe
- Installation of a Draw-Tite Custom Wiring # 118258 On a Hyundai Santa Fe
- Adding a 7-Way Trailer Connector to a 2009 Hyundai Santa Fe with 4-WayTrailer Connector
- Troubleshooting Trailer Wiring for 2007 Hyundai Santa Fe with No Power to Pins
- Routing a Trailer Wiring 4-Way through the Cargo Area of a Hyundai Santa Fe and Outside the Vehicle
- Installing a Brake Controller on a 2010 Hyundai Santa Fe with Factory Tow Package
- How to Determine Where to Drill Hole in Firewall of Vehicle to Install Brake Controller
- Trailer Hitch & Wiring Harness For 2011 Hyundai Santa Fe Limited to Tow Boat Trailer
- Comparison of Trailer Wiring Harnesses # 118415 and # 118258 for a 2009 Hyundai Santa Fe
- Trailer Wiring Harness for a 2012 Hyundai Santa Fe without Factory Tow Package
- What Size Fuse Does The Draw-Tite Custom Fit Vehicle Wiring # 118258 Use For 2008 Hyundai Santa Fe
- Correct Wiring Harness to Provide a 4-Way Trailer Connector on a 2007 Hyundai Santa Fe LTD
- Testing the T-One Wiring Harness # 118258 on a 2009 Hyundai Santa Fe Limited
- Weight Distribution Hitch Recommendation for a 2010 Hyundai Santa Fe Front Wheel Drive
- Parts Needed to Convert 4-Way of 2010 Hyundai Santa Fe to 7-Way and Install Brake Controller
- Comparison of Trailer Wiring Harnesses Available for the 2011 Hyundai Santa Fe and Routing the 4-Way
- What is the Correct Trailer Wiring Harness for the 2010 Hyundai Santa Fe SE with Towing Package
- Trailer Wiring Harness # 1182558 for Hyundai Santa Fe
- Installation of Replacement OEM Tow Package Wiring Harness 118258 On a 2008 Hyundai Santa Fe