Tuson Sway Control Location and Orientation
Question:
Hello I have a 7.5x27’ v nose all aluminum enclosed trailer. I purchased the tuson sway control and upon going to install it I noticed I can’t mount the control box with the sticker facing the front of the trailer with how the beams are set up. I am however able to mount it with it facing the rear. Will it function properly if mounted in the center of the trailer, 10ft from the ball location, facing the rear? Thank you
asked by: KAZ P
Expert Reply:
The instructions for the orientation of the Tuson Sway Control part # 335TSC-1000 when installed are very specific. The red dot on the label has to be at the trailer's center line and the arrows on the label that say "Mount with this side UP" has to be followed as well. You need to have the module mounted between 5 and 10 feet behind the coupler as well. It looks like your trailer will be a bit of challenge to pull all of this off but your worst case scenario would require you to fabricate a mounting bracket. Maybe a local welder could help.
Product Page this Question was Asked From
Tuson Trailer Sway Control System - Electronic - Up to 4 Axles
- Weight Distribution Hitch
- Sway Control Only
- Severe Sway
- Tuson RV Brakes
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Tuson Trailer Sway Control System - Electronic - Up to 4 Axles
- Shop: Curt True Course Advanced Bluetooth Trailer Sway Control - 1 to 4 Axles
- Search Results: hitch collar
- Search Results: trailer brake controller
- Shop: etrailer Hitch Pin Alignment Collar for Hitch Accessories - 2" Hitches
- Search Results: weight distribution hitch for aluminum trailer
- Shop: Brake Controller
- Q&A: Is Tuson Electronic Sway Control Compatible with 2018 Ram 2500 OEM Controller and 30' Travel Trailer
- Shop: Autowbrake Electric Brake Controller - Trailer Mount w/ Remote Fob - 1 to 3 Axles - Proportional
- Shop: Blue Ox SwayPro Weight Distribution w/ Sway Control for 2" Hitch - 15,000 lbs GTW, 1,500 lbs TW
- Shop: Reese Strait-Line Weight Distribution w/ Sway Control - No Shank - 12 lbs GTW, 1,200 lbs TW
- Q&A: Recommended Weight Distribution System on 9,150 Boat Trailer with Aluminum Frame
- Q&A: Weight Distribution Hitch for 24-Foot Enclosed Trailer with Limited Frame Clearance
- Q&A: Best Weight Distribution System for Towing a 28 ATC Aluminum Trailer with a 2017 Ford F-350
- Shop: Strait-Line Weight Distribution w/ Sway Control - No Shank - Trunnion Bar - 17K GTW, 1,700 lbs TW
- Q&A: Weight Distribution Systems Made in the USA
- Q&A: Recommended Weight Distribution System With Sway Control For 8 Inch Trailer Frame
- Q&A: Do Bearing Buddies Work Well on Travel Trailer Hubs
- Shop: Suspension Enhancement
- Search Results: receiver
- Video: An In-Depth Look at the Curt True Course Advanced Bluetooth Trailer Sway Control
- Shop: Trailer Hitch
- Video: Hands-On with the Curt Hitch Receiver Reducer Sleeves
- Video: An In-Depth Look at the Curt Hitch Receiver Reducer Sleeves
- Video: A Closer Look at the Curt Adjustable 2-Ball Mount
- Search Results: tuson sway control
- Search Results: electronic sway control
- Search Results: 12 inch drop shank
- Article: Trailer Wiring Diagrams
- Video: Review of the RoadActive Suspension Custom Leaf Spring Enhancement Kit
on Weight Distribution Hitch
