Comparing Curt and Draw Tite Trailer Hitches for 2020 GMC Acadia  

The Curt Trailer Hitch Receiver part #C13293 and the Draw-Tite Trailer Hitch Receiver part #76023 are both excellent options for a 2020 GMC Acadia. That said, there are some distinct differences. The Curt hitch (see photo one) hangs below the rear…

Did you make all of the modifications to the rear fascia that are outlined in the install instructions of the 76023?

The primary difference between the two is the height of the receiver tube once the hitch is installed. Both hitches use a crossbar that tucks up behind the bumper fascia for a clean looking installation but the Draw-Tite #76023 will sit higher up on…

The Draw-Tite Max-Frame Trailer Hitch Receiver part #76023 is a great option for a 2020 GMC Acadia. The hitch knockout panel can be re-installed with the hitch in place but it must be trimmed in order to do so. I have attached a photo below which…

We have everything that you need to start towing with your 2020 GMC Acadia! I recommend using the Draw-Tite Trailer Hitch #76023 because it mounts behind the rear bumper and has a very clean look with the lower panel removed. Then for wiring I…

The lower fascia piece on your 2019 GMC Acadia can be reinstalled after installing the Draw Tite hitch part #76023 but you will need to trim it slightly to allow it to fit into place properly. I've attached a picture from the install details to…

The Curt Class III Trailer Hitch Receiver #C13293 is indeed a confirmed fit for your new 2020 GMC Acadia and it's going to line right up to existing holes in the vehicle's frame rails for a bolt-on (no-drill) installation. The only minor…

Congrats! Glad the install of the Draw Tite hitch part #76023 went smoothly and you found an easier way to complete the install! Thanks for passing on the tips you discovered to make the install easier as well. Hopefully it helps future customers in…

As it is the fascia door on your 2018 GMC Acadia cannot be reinstalled once Draw-Tite trailer hitch #76023 is in place. It can be trimmed and put back on, see instructions link, but not will not fit unless it is trimmed. Basically the door is trimmed…

Yes, the Curt wiring harness #C56325 does fit your 2020 GMC Acadia. You can verify by finding the connector behind your Acadia's muffler. If you don't already have a trailer hitch I recommend the Curt #C13293 because it's a much easier…

Both the Draw-Tite part #76023 and Curt part #C13293 trailer hitches available for the 2020 GMC Acadia are great choices however there are some differences that set them apart. The Curt hitch is easier to install and more visible on the vehicle while…

The trailer hitch options for a 2020 GMC Acadia are the Curt Trailer Hitch Receiver part #C13293 (see photo one) and the Draw-Tite Max-Frame Trailer Hitch Receiver part #76023 (see photo two). The trailer hitches are both bolt-on options and have…