bing tracking image
Q & A Icon

How to Pair Furrion Backup Camera To Monitor In Place of Door Camera


When we plugged in our system, it automatically paired to the front door. We have tried to unpair it by holding the button under the camera for 15 seconds. This did not work. Do you have any suggestions that we might try?


Expert Reply:

While there isn't a way to "unpair" the door cam, pairing a different camera will accomplish what you need to allow you to use the Furrion Vision S Wireless RV Backup Camera System # FOS07TASF.

Before attempting to pair the rear camera, make sure both the camera and monitor have power supplied during pairing and setting processes. Note that the vehicle may need to be running.

1. Press the Menu button on the right of the monitor to turn on the monitor and enter the Menu Setting page.
2. Touch PAIRING on screen. It will be highlighted in red (Fig.1) once selected it will display the camera options for you to choose from (Fig. 2).
3. Select REAR CAM and press the “MONITOR PAIRING” button at the bottom of the camera for 3 seconds to pair. It is not necessary to press this button for 15 seconds.
4. Once paired successfully, a red PAIRED icon will appear after the device list (Fig. 4).

If you see an X icon instead (Fig. 5), this means the pairing failed. You'll need to repeat steps 3 and 4 to pair again. I've attached an installation video for you at the bottom of the page to guide you through the process.

If after several attempts you are still not able to pair your rear camera, please let me know.

click to enlarge
click to enlarge
click to enlarge
expert reply by:

Product Page this Question was Asked From

Q & A Icon

Similar Expert Q&A Pages

See More Q&A Expert Answers >>