Most Amount of Drop That Can Be Had with Equal-i-zer Weight Distribution System for 2-1/2 Inch Hitch
Question:
I wanting to purchase a equalizer 4 hitch but need a shandy for a 2.5inch reciever with 9inch of drop. Equalizer does not offer this. Is there another shank i can purchase that will work with the equalizer?
asked by: Jeff C
Expert Reply:
The most amount of drop we offer in a weight distribution shank with 2-1/2" stinger is 9-1/4", the Curt Weight Distribution Shank part # C17132 which can be used with an Equal-i-zer Weight Distribution System like part # EQ37141ET. If you need a higher capacity, the Equal-i-zer Weight Distribution System part # EQ64FR is available but not without the shank so you would just have to swap them out.
Please note, rise/drop is measured from the ground to the top inside edge of the receiver tube and then from the ground to the bottom of the trailer coupler while the trailer is level.
Products Referenced in This Question
Equal-i-zer Weight Distribution w/ 4-Point Sway Control - No Shank - 14,000 lbs GTW, 1,400 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Shank Not Included
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 1200 lbs
- 1300 lbs
- Equal-i-zer
more information >
Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 16,000 lbs GTW, 1,600 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2-1/2 Inch Hitch
- Allows Backing Up
- 1400 lbs
- 1500 lbs
- Equal-i-zer
more information >
Product Page this Question was Asked From
Curt Weight Distribution Shank for 2.5" Hitches - 9-1/4" or 10" Drop - 13" Rise
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1500 lbs TW
- 15000 lbs GTW
- Fits 2-1/2 Inch Hitch
- Round - 10 Inch Drop
- Trunnion - 9 Inch Drop
- Round - 13 Inch Rise
- Trunnion - 13 Inch Rise
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 16,000 lbs GTW, 1,600 lbs TW
- Shop: Equal-i-zer Weight Distribution w/ 4-Point Sway Control - No Shank - 14,000 lbs GTW, 1,400 lbs TW
- Shop: Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 14,000 lbs GTW, 1,400 lbs TW
- Q&A: Recommended Weight Distribution System for a Jayco Eagle HT 284bhok
- Q&A: Weight Distribution Hitch With Sway Control for 1,400 lb Tongue Weight
- Q&A: Which Heavy-Duty Weight Distribution System With Sway Control For a 2020 Ram 2500
- Q&A: Weight Distribution and Sway Control Recommendation 2018 Jayco Eagle 322RLOK
- Shop: Sway Bracket Jackets for Equal-i-zer Weight Distribution Systems - Qty 2
- Shop: Equal-i-zer High-Performance Lubricant - 4 oz
- Shop: Equal-i-zer Weight Distribution w/ 4-Point Sway Control - No Shank - 12,000 lbs GTW, 1,200 lbs TW
- Search Results: equalizer 1600
- Video: Equal-i-zer Weight Distribution EQ91-00-4250 Review
- Video: Equal-i-zer Weight Distribution EQ95-01-5150 Review
- Video: Review of Equal-i-zer Weight Distribution Hitch - WD With Sway Control - EQ64FR
- Shop: Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 10" Rise/6" Drop
- Search Results: equalizer 1400
- Search Results: 2.5 inch shank
- Article: How to Measure for Trailer Hitch Drop
- Video: Review of Equal-i-zer Weight Distribution Hitch - EQ90-02-4900
- Q&A: Recommended 2-1/2 Inch Weight Distribution Shank for 1400 lb Equal-I-zer Weight Distribution System
- Q&A: Best Equal-i-zer Weight Distribution Hitch for 1,150 lb Tongue Weight and 2-1/2 Inch Hitch
- Q&A: Weight Distribution Shank for EAZ System Used in 2020 Ram 2500 Hitch
- Shop: Vehicle Sway Bars
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Search Results: snappad
- Shop: Tonneau Cover
- Shop: RV Jack Pads
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Search Results: weight distribution hitch